1
Replacement parts
KitchenAid mixer hub cover thumbscrew knob
This is not a fixed STL. SpeakCAD generates the kitchenaid mixer hub cover thumbscrew knob to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a KitchenAid hub cover thumbscrew knob, 25 mm diameter 15 mm deep, hex pocket for the bolt, ribbed grip, PETG.
What a kitchenaid mixer hub cover thumbscrew knob is
A replacement head for the attachment-hub thumbscrew on KitchenAid tilt-head and bowl-lift stand mixers, the knurled knob that locks the hub cover and attachments. It is about 25 mm across and 15 mm deep with a hex pocket that captures the original metal bolt, so the thread you use is still steel, and a ribbed grip with 2 mm walls. Print face down in PETG with 100 percent infill around the pocket.
Some older KitchenAid models have a wing-style screw instead, so compare before printing. Open the ready-made knob free in SpeakCAD, set the hex size of your bolt in the viewer or the chat, then download the STL.
People also search
kitchenaid hub knobkitchenaid attachment hub screwkitchenaid hub cover knob 3d printkitchenaid thumbscrew stl
Questions people ask about a kitchenaid mixer hub cover thumbscrew knob
A replacement head for the attachment-hub thumbscrew on KitchenAid tilt-head and bowl-lift stand mixers, the knurled knob that locks the hub cover and attachments. It is about 25 mm across and 15 mm deep with a hex pocket that captures the original metal bolt, so the thread you use is still steel, and a ribbed grip with 2 mm walls. Print face down in PETG with 100 percent infill around the pocket.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a KitchenAid hub cover thumbscrew knob, 25 mm diameter 15 mm deep, hex pocket for the bolt, ribbed grip, PETG.
Some older KitchenAid models have a wing-style screw instead, so compare before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA Hemnes drawer knob replacement with M4 screwA replacement knob for IKEA Hemnes and Malm drawers that reproduces the round 25 mm shape when one cracks or goes missing from a second-hand dresser.IKEA MALM drawer soft-close bumperA bumper that sits on a MALM drawer runner so the 80 or 160 cm drawer does not slam into the carcass.Bambu Lab X1 Carbon lid riser corner spacersFour corner spacers that raise the glass top of an X1 Carbon (389 × 389 × 457 mm) by 20 mm, letting warm air out when printing PLA or PETG so the chamber doe…Bosch dishwasher folding tine clipA clip that holds a folding tine row of a Bosch or Siemens dishwasher basket in the up position, the part that snaps off after years of hot cycles.De'Longhi Magnifica drip tray floatA replacement float for the drip tray of De'Longhi Magnifica S and other ECAM bean-to-cup machines, the red indicator that pops up when the tray is full.Oven control knob for D-shaftA cracked oven knob slips on its shaft and makes setting temperature a guess.