1
Brackets & mounts
J1772 EV connector wall holster with drip slot
This is not a fixed STL. SpeakCAD generates the j1772 ev connector wall holster with drip slot to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a J1772 connector wall holster, 46 mm socket 40 mm deep tilted 15 degrees, 12 mm latch slot, 6 mm drain, 70×100 mm back plate, ASA.
What a j1772 ev connector wall holster with drip slot is
A wall holster for a J1772 (Type 1) charging handle, with a round socket about 46 mm across that the plug nose drops into and a 12 mm slot for the latch button so it stays unpressed. The socket is 40 mm deep and tilts 15 degrees down, a 6 mm drain slot lets rain out, and the back plate is 70 × 100 mm with two 5 mm holes. Walls are 3 mm. Print in ASA for outdoor use, back plate down.
A NACS or Type 2 plug has a different nose and will not seat in this socket. Open the ready-made holster in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
j1772 holsterj1772 connector holder stlev charger plug holder 3d printtype 1 ev plug wall mount
Questions people ask about a j1772 ev connector wall holster with drip slot
A wall holster for a J1772 (Type 1) charging handle, with a round socket about 46 mm across that the plug nose drops into and a 12 mm slot for the latch button so it stays unpressed. The socket is 40 mm deep and tilts 15 degrees down, a 6 mm drain slot lets rain out, and the back plate is 70 × 100 mm with two 5 mm holes. Walls are 3 mm. Print in ASA for outdoor use, back plate down.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a J1772 connector wall holster, 46 mm socket 40 mm deep tilted 15 degrees, 12 mm latch slot, 6 mm drain, 70×100 mm back plate, ASA.
A NACS or Type 2 plug has a different nose and will not seat in this socket. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Sonos Roam wall holder with USB-C charging cutoutA cradle that holds a Sonos Roam upright on a bathroom or kitchen wall while a USB-C cable stays plugged into the back.Pedaltrain Classic pedalboard riser for Boss pedalsA rear-row riser that clips onto the two back rails of a Pedaltrain Classic or Classic Jr and lifts a Boss compact pedal (73 x 129 x 59 mm) by 40 mm so its f…Philips Hue Dimmer v2 magnetic wall plateA plate that holds a Hue Dimmer switch v2 (about 92 × 35 mm) on a steel door or fridge so it is not taped to the wall.GL.iNet Beryl AX travel router mountA strap-on mount for a GL.iNet Beryl AX (GL-MT3000, about 120 × 83 × 34 mm) that holds it on a desk leg, van wall or hotel TV cable.Quad Lock compatible fork stem expander mountA fork stem mount for motorcycles with a hollow steering stem, with an expanding wedge that locks inside the hole and a top plate for a Quad Lock style phone…Curtain rod bracket for a 25 mm poleA replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke.