1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
IKEA SMÅSTAD wardrobe rail hook
This is not a fixed STL. SpeakCAD generates the ikea småstad wardrobe rail hook to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea småstad wardrobe rail hook is
A hook that hangs backpacks from a SMÅSTAD clothes rail (about 16 mm) so they are not on the floor of the wardrobe. The saddle is 17 mm ID with a 12 mm hook. Print two in PETG with 2 mm walls.
The PAX rail hook is for a thicker rail. In SpeakCAD you add a second hook, preview it in the browser without paying, then download the STL.
Example prompt
Model a SMÅSTAD wardrobe rail hook, 17 mm saddle, 12 mm hook, PETG, pair.
People also search
smastad rail hook stlikea smastad backpack hook 3d printsmastad wardrobe hookikea kids rail hook 3d model
Questions people ask about a ikea småstad wardrobe rail hook
A hook that hangs backpacks from a SMÅSTAD clothes rail (about 16 mm) so they are not on the floor of the wardrobe. The saddle is 17 mm ID with a 12 mm hook. Print two in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a SMÅSTAD wardrobe rail hook, 17 mm saddle, 12 mm hook, PETG, pair.
The PAX rail hook is for a thicker rail. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Bosch L-BOXX 238 jigsaw-blade insertAn insert for an L-BOXX 238 that holds a GST 18V, 20 T-shank blades in 1.5 mm slots, and a splinter guard pack.Dyson Big+Quiet Formaldehyde remote cradleA cradle that holds the larger Big+Quiet Formaldehyde remote (about 130 × 50 × 14 mm) on the top of the cylinder so it does not slide off the curved lid.Festool Domino DF 700 tenon caddyA caddy that holds DF 700 tenons (8, 10, 12, 14 mm) in labelled wells so they are not mixed with DF 500 stock.Hair tie and claw clip organizer standA bathroom counter stand with a vertical 25 mm post for stacking elastic hair ties, a slotted rail that grips claw clips by their hinges, and a small cup for…DeWalt ToughSystem drill bit index insert 1 to 13 mmA stepped drill bit index that drops into the small removable cup of a DeWalt ToughSystem 2.0 organizer (DWST08020) and holds a full metric set from 1 to 13…Philips Sonicare brush head stand for four headsA stand that holds four Philips Sonicare brush heads upright next to the charger so each family member's head dries in the air rather than lying on the sink.