1
Replacement parts
IKEA SCHOTTIS pleated blind clip
This is not a fixed STL. SpeakCAD generates the ikea schottis pleated blind clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an IKEA SCHOTTIS clip, 30 mm wide, 3 mm slot, hook, PETG.
What a ikea schottis pleated blind clip is
A replacement clip for the IKEA SCHOTTIS pleated paper blind, the small plastic clip that holds the folded blind up at the height you choose. It is about 30 mm wide with a 3 mm slot that grips the folded paper stack and a hook over the cord, with 1.2 mm walls. Print on its side in PETG so the slot flexes without snapping.
HOPPVALS is a honeycomb blind on a rail and does not use this clip. Open the ready-made clip free in SpeakCAD, change the slot for your blind in the viewer or the chat, then download the STL.
People also search
ikea schottis clipschottis blind clip replacementikea pleated blind clip 3d printschottis clip stl
Questions people ask about a ikea schottis pleated blind clip
A replacement clip for the IKEA SCHOTTIS pleated paper blind, the small plastic clip that holds the folded blind up at the height you choose. It is about 30 mm wide with a 3 mm slot that grips the folded paper stack and a hook over the cord, with 1.2 mm walls. Print on its side in PETG so the slot flexes without snapping.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an IKEA SCHOTTIS clip, 30 mm wide, 3 mm slot, hook, PETG.
HOPPVALS is a honeycomb blind on a rail and does not use this clip. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA MALM drawer soft-close bumperA bumper that sits on a MALM drawer runner so the 80 or 160 cm drawer does not slam into the carcass.Bambu Lab X1 Carbon lid riser corner spacersFour corner spacers that raise the glass top of an X1 Carbon (389 × 389 × 457 mm) by 20 mm, letting warm air out when printing PLA or PETG so the chamber doe…Bosch dishwasher folding tine clipA clip that holds a folding tine row of a Bosch or Siemens dishwasher basket in the up position, the part that snaps off after years of hot cycles.De'Longhi Magnifica drip tray floatA replacement float for the drip tray of De'Longhi Magnifica S and other ECAM bean-to-cup machines, the red indicator that pops up when the tray is full.Oven control knob for D-shaftA cracked oven knob slips on its shaft and makes setting temperature a guess.IKEA Bekvam step stool anti-slip foot replacementA replacement foot for the IKEA Bekvam step stool that covers the raw end of each leg when the original plastic glide falls off or the wood starts scratching…