1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
IKEA MALM drawer soft-close bumper
This is not a fixed STL. SpeakCAD generates the ikea malm drawer soft-close bumper to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea malm drawer soft-close bumper is
A bumper that sits on a MALM drawer runner so the 80 or 160 cm drawer does not slam into the carcass. The pad is 20 × 12 × 8 mm with a 2 mm TPU face and a 4 mm peg that presses into the runner hole. Print a pair in TPU, or PLA core plus TPU face.
MALM never shipped with dampers. In SpeakCAD you confirm 2 vs 4-drawer, preview a bumper in the browser at no cost, then download the STL.
Example prompt
Design a MALM drawer bumper 20×12×8 mm with a 4 mm peg and 2 mm TPU face, printed as a pair.
People also search
ikea malm drawer bumper stlmalm soft close 3d printmalm drawer damperikea malm slam stop 3d model
Questions people ask about a ikea malm drawer soft-close bumper
A bumper that sits on a MALM drawer runner so the 80 or 160 cm drawer does not slam into the carcass. The pad is 20 × 12 × 8 mm with a 2 mm TPU face and a 4 mm peg that presses into the runner hole. Print a pair in TPU, or PLA core plus TPU face.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a MALM drawer bumper 20×12×8 mm with a 4 mm peg and 2 mm TPU face, printed as a pair.
MALM never shipped with dampers. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA SMÅSTAD bin-lid soft bumpA bump that sits under a SMÅSTAD bench-bin lid so it does not slam on little fingers.Fridge door shelf bracket supportRefrigerator door shelves hang on small plastic supports that go brittle in the cold and crack under a full milk carton.Headset spacer set for 1 1/8 inch 28.6 mm steererStack-height spacers for a 1 1/8 inch fork steerer, 28.6 mm nominal, in 2.5, 5, 10 and 15 mm thicknesses so you can dial in bar height on a Canyon, Trek or S…IKEA Hemnes drawer knob replacement with M4 screwA replacement knob for IKEA Hemnes and Malm drawers that reproduces the round 25 mm shape when one cracks or goes missing from a second-hand dresser.IKEA ALEX drawer-stop clip pairA pair of clips that stop an ALEX drawer from rolling all the way out on a slightly uneven floor.IKEA BESTÅ 30 mm leg riserA 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit.