1
Replacement parts
Elegoo Centauri Carbon lid riser
This is not a fixed STL. SpeakCAD generates the elegoo centauri carbon lid riser to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model four L-shaped lid riser corners for an Elegoo Centauri Carbon, 40×40 mm, 20 mm lift, 4 mm lips above and below, 30×12 mm PTFE notch.
What a elegoo centauri carbon lid riser is
A riser that holds the glass lid of an Elegoo Centauri Carbon (about 400 × 405 × 485 mm) 20 mm above the frame to vent the chamber when printing PLA. It is four L-shaped corner pieces, each 40 × 40 mm with a 4 mm locating lip above and below, plus a 30 × 12 mm notch in one corner for a PTFE tube from a top spool. Print in PETG or ASA, lip up.
A Bambu P1S lid has its own corner shape, so their spacers do not lock on the Centauri. Open the corners in SpeakCAD for free, change the lift in the viewer or the chat, then download the STL.
People also search
centauri carbon lid riser stlelegoo centauri carbon top risercentauri carbon pla lidcentauri carbon lid spacer 3d print
Questions people ask about a elegoo centauri carbon lid riser
A riser that holds the glass lid of an Elegoo Centauri Carbon (about 400 × 405 × 485 mm) 20 mm above the frame to vent the chamber when printing PLA. It is four L-shaped corner pieces, each 40 × 40 mm with a 4 mm locating lip above and below, plus a 30 × 12 mm notch in one corner for a PTFE tube from a top spool. Print in PETG or ASA, lip up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model four L-shaped lid riser corners for an Elegoo Centauri Carbon, 40×40 mm, 20 mm lift, 4 mm lips above and below, 30×12 mm PTFE notch.
A Bambu P1S lid has its own corner shape, so their spacers do not lock on the Centauri. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
IKEA IVAR caster adapter plateA plate that lets you bolt a 40 mm caster under an IVAR side unit so the pine shelf becomes a rolling cart.Anycubic Kobra S1 riser feetRiser feet that lift a Kobra S1 25 mm so its bottom vents breathe and the ACE Pro cable can run under it.Bosch washing machine programme knobA replacement programme selector knob for Bosch Serie 4 and Serie 6 washing machines, about 55 mm across and 25 mm deep.Toilet seat hinge cover capsA pair of replacement cover caps for toilet seat hinges, the snap-on covers that hide the fixing bolts on the hinge blocks.Osprey backpack sternum strap buckle replacementThe sliding sternum strap buckle on Osprey Talon, Stratos and Atmos packs (and similar Deuter and Gregory ones) rides along a webbing rail and cracks after a…IKEA BESTÅ glass-door soft bumpA 8 mm silicone-style bump that sticks on a BESTÅ glass door so it does not slap the frame.