1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Replacement parts
IKEA IVAR caster adapter plate
This is not a fixed STL. SpeakCAD generates the ikea ivar caster adapter plate to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea ivar caster adapter plate is
A plate that lets you bolt a 40 mm caster under an IVAR side unit so the pine shelf becomes a rolling cart. The plate is 60 × 60 × 8 mm with four 5 mm IVAR holes and a 10 mm caster boss. Print four in PETG with 3 mm walls.
IVAR was not sold with wheels. In SpeakCAD you pick caster size, preview a plate in the browser without paying, then download the STL.
Example prompt
Model an IVAR caster adapter 60×60×8 mm, four 5 mm holes, 10 mm caster boss, PETG, set of four.
People also search
ivar caster plate stlikea ivar wheels 3d printivar rolling cart adapterivar caster mount 3d model
Questions people ask about a ikea ivar caster adapter plate
A plate that lets you bolt a 40 mm caster under an IVAR side unit so the pine shelf becomes a rolling cart. The plate is 60 × 60 × 8 mm with four 5 mm IVAR holes and a 10 mm caster boss. Print four in PETG with 3 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an IVAR caster adapter 60×60×8 mm, four 5 mm holes, 10 mm caster boss, PETG, set of four.
IVAR was not sold with wheels. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Tape-measure 25 mm belt-clip replacementA replacement belt clip for a 5–8 m tape with a 25 mm hook and two 3.5 mm holes matching Stanley / Komelon patterns.Manfrotto Befree centre-column hookA hook that hangs a bag from a Befree centre column so the tripod stays put in wind, 12 mm snap.IKEA POÄNG foot felt-pad replacementA felt-faced pad that replaces a worn POÄNG foot (about 30 × 20 mm) so the birch runners stop scratching a wood floor.Sony a7C II cold-shoe capA cap that covers the a7C II hot shoe so the contacts stay clean in a bag.Stroller wheel hub capA lost hub cap lets grit into a stroller wheel bearing and exposes a sharp axle end, and manufacturers seldom sell the cap alone.Creality Ender 3 V3 bed leveling knob replacementA replacement thumbwheel for the bed leveling screws on a Creality Ender 3 V3 SE and KE, Ender 3 V2 and Neo, which use M4 screws with a knurled 34 mm plastic…