1
Replacement parts
Creality K1 top filament guide with 608 bearing
This is not a fixed STL. SpeakCAD generates the creality k1 top filament guide with 608 bearing to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a top filament guide for a Creality K1, 608 bearing pulley with 2.5 mm groove, PC4-M6 outlet for 4 mm PTFE, 2 mm lip clip.
What a creality k1 top filament guide with 608 bearing is
A filament guide that clips on the rear top edge of a Creality K1 and redirects filament from a spool on the back into the top of the extruder, with a 608 bearing (22 × 8 × 7 mm) as the pulley to stop the filament from scraping the frame. The pulley groove is 2.5 mm, the outlet takes a PC4-M6 fitting for a 4 mm PTFE tube, and the clip grips a 2 mm lip. Print in PETG, on its side.
The K1 Max has its runout sensor in a different place, so the guide angle changes. Open the ready-made guide in SpeakCAD for free, adjust the clip or angle in the viewer or the chat, then download the STL.
People also search
k1 filament guide stlcreality k1 filament guide bearingk1 top spool guidek1 filament guide 3d print
Questions people ask about a creality k1 top filament guide with 608 bearing
A filament guide that clips on the rear top edge of a Creality K1 and redirects filament from a spool on the back into the top of the extruder, with a 608 bearing (22 × 8 × 7 mm) as the pulley to stop the filament from scraping the frame. The pulley groove is 2.5 mm, the outlet takes a PC4-M6 fitting for a 4 mm PTFE tube, and the clip grips a 2 mm lip. Print in PETG, on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a top filament guide for a Creality K1, 608 bearing pulley with 2.5 mm groove, PC4-M6 outlet for 4 mm PTFE, 2 mm lip clip.
The K1 Max has its runout sensor in a different place, so the guide angle changes. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Hose reel side cover latchWall-mounted hose reels keep their spool cover on with a rotating latch that fatigues in sunlight and snaps, letting the cover flap loose.IKEA METOD hinge spacer 2 mmA 2 mm spacer that sits behind a METOD hinge plate so a warped cabinet still closes.IKEA SKOGSTA bench felt foot capsCaps that slip over SKOGSTA bench legs (about 45 × 45 mm acacia) so the bench does not dent a wood floor.Elegoo Centauri Carbon riser feetFour riser feet that raise an Elegoo Centauri Carbon 25 mm, giving the rear exhaust and bottom a little more air and damping vibration on a light desk.Beko freezer drawer front handleA clip-on handle for Beko and Blomberg freezer drawers, whose moulded front lip snaps off.Roller blind bottom bar end capEnd caps for the bottom weight bar of roller blinds, which stop the bar sliding out of its fabric pocket.