1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
IKEA HEMNES bookcase anti-tip bracket
This is not a fixed STL. SpeakCAD generates the ikea hemnes bookcase anti-tip bracket to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea hemnes bookcase anti-tip bracket is
A bracket that ties a HEMNES bookcase (90 cm) to the wall through the existing top-rail holes. The plate is 70 × 40 × 4 mm with two 4.5 mm wall holes and two 5 mm HEMNES holes. Print in PETG with 3 mm walls.
The BILLY anti-tip does not match HEMNES spacing. In SpeakCAD you confirm 90 vs 135 cm, preview the bracket in the browser at no cost, then download the STL.
Example prompt
Design a HEMNES bookcase anti-tip bracket 70×40×4 mm, two 4.5 mm wall holes, two 5 mm HEMNES holes, 3 mm PETG.
People also search
hemnes anti tip stlikea hemnes wall bracket 3d printhemnes bookcase safetyhemnes tip restraint 3d model
Questions people ask about a ikea hemnes bookcase anti-tip bracket
A bracket that ties a HEMNES bookcase (90 cm) to the wall through the existing top-rail holes. The plate is 70 × 40 × 4 mm with two 4.5 mm wall holes and two 5 mm HEMNES holes. Print in PETG with 3 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a HEMNES bookcase anti-tip bracket 70×40×4 mm, two 4.5 mm wall holes, two 5 mm HEMNES holes, 3 mm PETG.
The BILLY anti-tip does not match HEMNES spacing. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Pole mount bracket for a 40 mm mastA two-piece clamp that grips a 40 mm round mast and offers a flat face with screw holes for a small antenna or outdoor Wi-Fi unit.Peloton Bike phone and tablet holder trayA tray that clamps to the horizontal section of the Peloton Bike or Bike+ handlebar and holds a phone or small tablet beside the main screen, handy for readi…Ryobi ONE+ battery wall mount strip for 18V packsA strip of sockets for Ryobi ONE+ 18V batteries, from the slim 1.5 Ah to the 6 Ah High Performance packs, which all share the same stem.Pedaltrain Classic pedalboard riser for Boss pedalsA rear-row riser that clips onto the two back rails of a Pedaltrain Classic or Classic Jr and lifts a Boss compact pedal (73 x 129 x 59 mm) by 40 mm so its f…Aqara Hub M3 under-shelf clipA clip that hides an Aqara Hub M3 under a 12–24 mm shelf with the USB-C facing out.Milwaukee SHOCKWAVE bit-case wall clipA clip that hangs a SHOCKWAVE bit case (about 160 × 110 × 30 mm) on a stud so the case is not in a drawer.