1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
IKEA BESTÅ TV-unit cord channel
This is not a fixed STL. SpeakCAD generates the ikea bestå tv-unit cord channel to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea bestå tv-unit cord channel is
A channel that hides HDMI and power along the back rail of a BESTÅ TV unit (about 180 mm deep frames) so cables do not show through glass doors. The trough is 200 × 22 × 18 mm with two 4.5 mm holes on 80 mm centres. Print in PETG with 1.6 mm walls.
The BESTÅ 60 mm grommet is a hole cover, not a run. In SpeakCAD you set frame width, preview the channel in the browser at no cost, then download the STL.
Example prompt
Design a BESTÅ TV cord channel 200×22×18 mm, two 4.5 mm holes on 80 mm centres, 1.6 mm PETG.
People also search
besta cable channel stlikea besta tv cord cover 3d printbesta cable racewaybesta tv cable tidy 3d model
Questions people ask about a ikea bestå tv-unit cord channel
A channel that hides HDMI and power along the back rail of a BESTÅ TV unit (about 180 mm deep frames) so cables do not show through glass doors. The trough is 200 × 22 × 18 mm with two 4.5 mm holes on 80 mm centres. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a BESTÅ TV cord channel 200×22×18 mm, two 4.5 mm holes on 80 mm centres, 1.6 mm PETG.
The BESTÅ 60 mm grommet is a hole cover, not a run. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Mouse bungee with weighted baseA desk accessory that lifts a wired mouse cable off the mat so it never snags or drags.Galaxy S25 Ultra S Pen desk dockA nightstand dock for a Samsung Galaxy S25 Ultra (about 163 × 79 × 8.2 mm) that holds the phone at 50 degrees and parks the S Pen in a 7.2 mm square well 45…Polar Vantage V3 charger cradleA cradle that holds a Vantage V3 on its four-pogo cable at 15 degrees, 48 mm nest.iMac 24-inch M4 cable-tidy footA foot that clips onto the iMac 24 M4 stand and gathers power plus Thunderbolt into a 16 mm channel so they do not show from the front.iPad Air 13-inch M3 Magic Keyboard riserA 28 mm riser that lifts a 13-inch iPad Air M3 in its Magic Keyboard so a USB-C hub fits underneath.Keychron Lemokey P1 palm restA 18 mm palm rest for a Lemokey P1 (about 370 × 140 mm) with a 8 mm front radius and four 3 mm foot recesses.