1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Keychron Q2 HE wrist rest
This is not a fixed STL. SpeakCAD generates the keychron q2 he wrist rest to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a keychron q2 he wrist rest is
A 20 mm wrist rest that matches a Keychron Q2 HE (about 360 × 150 mm) with two 8 × 2 mm magnet pockets for the case's front magnets. The rest is 360 × 80 × 20 mm with a 8 mm front radius. Print as two PLA halves.
The Q1 HE rest is 20 mm too wide. In SpeakCAD you confirm Q2 vs Q2 Max, preview the rest in the browser at no cost, then download the STL.
Example prompt
Design a Q2 HE wrist rest 360×80×20 mm in two halves, 8 mm front radius, two 8×2 mm magnet pockets, 2 mm walls.
People also search
keychron q2 he rest stlq2 he wrist rest 3d printkeychron q2 he palm restq2 he magnetic rest 3d model
Questions people ask about a keychron q2 he wrist rest
A 20 mm wrist rest that matches a Keychron Q2 HE (about 360 × 150 mm) with two 8 × 2 mm magnet pockets for the case's front magnets. The rest is 360 × 80 × 20 mm with a 8 mm front radius. Print as two PLA halves.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Q2 HE wrist rest 360×80×20 mm in two halves, 8 mm front radius, two 8×2 mm magnet pockets, 2 mm walls.
The Q1 HE rest is 20 mm too wide. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Garmin Venu 3 charger-clip dockA dock that holds a Venu 3 (about 45 mm) on its clip charger at 20 degrees.iPad Air 11 inch drawing stand with Apple Pencil trayA low-angle drawing stand for the iPad Air 11 (247.6 x 178.5 x 6.1 mm) that props the tablet at 20 degrees like a drafting board, with a groove along the fro…AirPods 4 ANC desk charging standA small desk stand that holds an AirPods 4 ANC case (about 50 × 50 × 21 mm) at 20 degrees with the lid able to open.Shure SM7dB yoke spacerA pair of spacers that move an SM7dB yoke 8 mm so a thicker windscreen still clears.MagSafe, Apple Watch and AirPods trio standA nightstand stand that holds a MagSafe puck at 60 degrees, an Apple Watch Ultra / Series puck in a 28 mm bore, and an AirPods 4 case in a 52 mm well.Philips Hue Iris desk cable channelA channel that hides the Hue Iris power brick (about 70 × 40 × 25 mm) and USB-C lead behind a desk so the lamp sits clean on a shelf.