1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Organizers & storage
IKEA ALEX drawer pencil-well insert
This is not a fixed STL. SpeakCAD generates the ikea alex drawer pencil-well insert to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ikea alex drawer pencil-well insert is
A shallow insert that sits in an ALEX drawer (about 264 mm internal on the 36 cm unit) with twelve 10 mm pencil wells and a 80 × 40 mm eraser tray. The plate is 260 × 80 × 16 mm. Print in PLA with 1.6 mm walls.
The existing ALEX pen-and-tools tray is a deeper mixed insert. Describe 36 vs 58 cm in SpeakCAD, preview the insert in the browser for free, then download the STL.
Example prompt
Create an ALEX pencil-well insert 260×80×16 mm, twelve 10 mm wells, 80×40 mm tray, 1.6 mm walls.
People also search
alex pencil insert stlikea alex pencil tray 3d printalex drawer pencil organizeralex 36cm insert 3d model
Questions people ask about a ikea alex drawer pencil-well insert
A shallow insert that sits in an ALEX drawer (about 264 mm internal on the 36 cm unit) with twelve 10 mm pencil wells and a 80 × 40 mm eraser tray. The plate is 260 × 80 × 16 mm. Print in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an ALEX pencil-well insert 260×80×16 mm, twelve 10 mm wells, 80×40 mm tray, 1.6 mm walls.
The existing ALEX pen-and-tools tray is a deeper mixed insert. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Makita MakPac type 2 insert for impact bit casesA shallow tray for the Makita MakPac Type 2 case (about 395 by 295 mm inside, 105 mm deep) that holds two Makita impact bit cases, a set of 1/4 inch hex nut…DJI Mini 4 Pro ND filter case with six slotsA pocket case for the snap-on ND filters used by the DJI Mini 4 Pro and Mini 3 Pro, which measure roughly 25 x 24 mm and 8 mm deep including the clip and are…SMD reel holder 8, 12 and 16 mmA bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges.IKEA PAX 60 cm drawer dividerA divider that splits a 60 cm PAX/KOMPLEMENT drawer (about 564 mm internal) into two 280 mm wells for folded tees.Sony WH-1000XM6 travel-case insertAn insert that keeps XM6 cups from grinding in the official case, with two 90 mm cup wells and a 20 mm cable trough.SIM eject tool and nano SIM card holder keychainA keychain tag that stores a SIM eject pin and up to two spare nano SIM cards (12.3 x 8.8 x 0.67 mm) for travel, so swapping an eSIM-less iPhone 15 or Galaxy…