1
Organizers & storage
French cleat hanger for a 184 mm circular saw
This is not a fixed STL. SpeakCAD generates the french cleat hanger for a 184 mm circular saw to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a French cleat circular saw hanger, two hooks 110 mm apart with 8 mm gaps and 35 mm lips, 45 degree cleat for 19 mm plywood, PETG.
What a french cleat hanger for a 184 mm circular saw is
A French cleat hanger for a 7-1/4 inch (184 mm) circular saw that hangs it by the base shoe, blade guard facing the wall. Two hooks 110 mm apart have 8 mm gaps and 35 mm lips to catch shoe plates 3 to 6 mm thick, and the 45 degree cleat fits 19 mm plywood rails. Print each hook on its side in PETG with 100 percent infill in the hook.
A 165 mm cordless saw has a narrower shoe; move the hooks closer before printing. Open the model in SpeakCAD for free, change the spacing in the chat or the viewer, then download the STL.
People also search
circular saw wall mountfrench cleat circular saw holder stlcircular saw hanger 3d printskil saw storage french cleat
Questions people ask about a french cleat hanger for a 184 mm circular saw
A French cleat hanger for a 7-1/4 inch (184 mm) circular saw that hangs it by the base shoe, blade guard facing the wall. Two hooks 110 mm apart have 8 mm gaps and 35 mm lips to catch shoe plates 3 to 6 mm thick, and the 45 degree cleat fits 19 mm plywood rails. Print each hook on its side in PETG with 100 percent infill in the hook.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a French cleat circular saw hanger, two hooks 110 mm apart with 8 mm gaps and 35 mm lips, 45 degree cleat for 19 mm plywood, PETG.
A 165 mm cordless saw has a narrower shoe; move the hooks closer before printing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
SMD reel holder 8, 12 and 16 mmA bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges.IKEA BROR pegboard hook adapterAn adapter that lets a 6 mm pegboard hook sit in the BROR side-panel holes (about 10 mm) so you can hang tools on the trolley.Tesla Model 3 Highland key card console holderA slim holder for a spare Tesla key card (credit-card size, 85.6 × 54 × 0.8 mm) that sticks inside the Model 3 Highland centre console so the card is always…French cleat rack for 310 ml caulk cartridgesA rack for six standard 310 ml caulk and sealant cartridges, about 50 mm across and 215 mm long with the nozzle.Glasses stand for several pairs of spectaclesA tiered stand that holds reading glasses, sunglasses and spare frames open-armed, lenses facing out and never touching a surface.IKEA Kallax insert divider for 33 cm cubesA cross-shaped divider that slots into a single Kallax cube and splits the 33 by 33 cm opening into four compartments for scarves, yarn, cables or toys.