1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Philips Hue Play bar desk-edge clamp
This is not a fixed STL. SpeakCAD generates the philips hue play bar desk-edge clamp to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a philips hue play bar desk-edge clamp is
A clamp that hangs a Hue Play bar (about 254 × 44 × 36 mm) from a 15–32 mm desk edge so bias lighting sits behind a monitor. The well is 256 × 38 mm with 0.4 mm clearance and an M5 thumb screw. Print in PETG with 2 mm walls.
The Hue Go 2 shelf and Bridge clip are different lamps. Tell SpeakCAD desk thickness, preview the clamp in the browser without paying, then download the STL.
Example prompt
Model a Hue Play desk clamp, 256×38 mm well, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG.
People also search
hue play clamp stlphilips hue play desk mount 3d printhue play bar holderhue play bias clamp 3d model
Questions people ask about a philips hue play bar desk-edge clamp
A clamp that hangs a Hue Play bar (about 254 × 44 × 36 mm) from a 15–32 mm desk edge so bias lighting sits behind a monitor. The well is 256 × 38 mm with 0.4 mm clearance and an M5 thumb screw. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Hue Play desk clamp, 256×38 mm well, clamp for 15–32 mm desks, M5 thumb screw, 2 mm PETG.
The Hue Go 2 shelf and Bridge clip are different lamps. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Quad Lock wall mount plate for shower or workshopA flat plate with a Quad Lock style twist-lock recess so any phone in a Quad Lock case snaps onto a shower wall, a workshop board or the side of a fridge.Sonos Roam wall holder with USB-C charging cutoutA cradle that holds a Sonos Roam upright on a bathroom or kitchen wall while a USB-C cable stays plugged into the back.Bambu Lab A1 AMS Lite spool holder riser bracketA riser that lifts the Bambu Lab AMS Lite 60 mm above the desk so the four spools clear the A1 or A1 mini bed when the printer sits on a shelf, and adds feet…Aqara Presence Sensor FP2 45-degree corner bracketA corner bracket that aims an Aqara FP2 presence sensor (about 64 × 64 × 28 mm) at 45 degrees across a room.Dyson V12 Detect Slim tool clipA clip that snaps a V12 Detect Slim crevice or combination tool onto the wand so it travels with the vacuum.Bose SoundLink Flex 2 bike mountA mount that holds a SoundLink Flex 2 (about 90 × 51 × 201 mm) on a 22.2 or 31.8 mm handlebar so a picnic ride has a speaker.