1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Philips Hue Dimmer v2 magnetic wall plate
This is not a fixed STL. SpeakCAD generates the philips hue dimmer v2 magnetic wall plate to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a philips hue dimmer v2 magnetic wall plate is
A plate that holds a Hue Dimmer switch v2 (about 92 × 35 mm) on a steel door or fridge so it is not taped to the wall. The well is 94 × 37 mm with two 8 × 2 mm magnet pockets. Print in PLA with 1.6 mm walls.
The official plate needs screws. In SpeakCAD you pick fridge vs door, preview the plate in the browser for free, then download the STL.
Example prompt
Create a Hue Dimmer v2 magnetic plate 110×50×8 mm, 94×37 mm well, two 8×2 mm magnet pockets, 1.6 mm walls.
People also search
hue dimmer v2 plate stlphilips hue dimmer magnet 3d printhue dimmer wall platehue switch magnetic holder 3d model
Questions people ask about a philips hue dimmer v2 magnetic wall plate
A plate that holds a Hue Dimmer switch v2 (about 92 × 35 mm) on a steel door or fridge so it is not taped to the wall. The well is 94 × 37 mm with two 8 × 2 mm magnet pockets. Print in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Hue Dimmer v2 magnetic plate 110×50×8 mm, 94×37 mm well, two 8×2 mm magnet pockets, 1.6 mm walls.
The official plate needs screws. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
IKEA HEMNES bookcase anti-tip bracketA bracket that ties a HEMNES bookcase (90 cm) to the wall through the existing top-rail holes.Bracket to fit a 2.5 inch SSD in a 3.5 inch bayA rail-style bracket that positions a 2.5 inch SSD inside a 3.5 inch drive bay so the case's standard screws or tool-less clips engage.Hidden AirTag mount under bike saddle railsA small clamshell that bolts between the two 7 mm rails under a bicycle saddle and hides an Apple AirTag (31.9 mm diameter, 8 mm thick) where a thief will no…Starlink Gen 3 router wall mount bracketA bracket that stands the Starlink Gen 3 router upright on a wall or under a shelf so it does not take up a desk.Hatch Rest sound machine wall shelf with cable channelA small shelf that mounts a Hatch Rest or Rest+ sound machine on the nursery wall out of reach of a toddler while keeping the top touch ring accessible.Dyson Gen5detect crevice-tool clipA clip that holds the Gen5detect crevice tool on the wand so it does not live in the other room.