1
Brackets & mounts
Creality Ender-3 V3 SE LED bar mount
This is not a fixed STL. SpeakCAD generates the creality ender-3 v3 se led bar mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an LED bar mount for a 2040 extrusion, M5 T-nut hole, 12×8 mm channel for 10 mm LED strip, angled 20 degrees down.
What a creality ender-3 v3 se led bar mount is
A pair of mounts that fix an LED strip channel under the top beam of an Ender-3 V3 SE, lighting the 220 × 220 mm bed from above. Each mount bolts to the 2040 extrusion with an M5 T-nut, holds a 12 × 8 mm channel for a 10 mm wide 24 V strip, and angles it 20 degrees towards the bed. Print in PETG or ASA on its side.
The Neptune 4 Pro also uses 2040 extrusions, but its beam is longer so you need a longer channel, not new mounts. Open the ready-made model in SpeakCAD for free, change the angle or channel in the viewer or the chat, then download the STL.
People also search
ender 3 v3 se led bar stlender 3 led light mount2040 led strip mountender 3 v3 se light 3d print
Questions people ask about a creality ender-3 v3 se led bar mount
A pair of mounts that fix an LED strip channel under the top beam of an Ender-3 V3 SE, lighting the 220 × 220 mm bed from above. Each mount bolts to the 2040 extrusion with an M5 T-nut, holds a 12 × 8 mm channel for a 10 mm wide 24 V strip, and angles it 20 degrees towards the bed. Print in PETG or ASA on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an LED bar mount for a 2040 extrusion, M5 T-nut hole, 12×8 mm channel for 10 mm LED strip, angled 20 degrees down.
The Neptune 4 Pro also uses 2040 extrusions, but its beam is longer so you need a longer channel, not new mounts. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
IKEA LACK shelf wall-bracket coverA cover that hides the stamped LACK shelf bracket (about 50 × 40 mm) so the 30 or 110 cm shelf looks like it floats.TP-Link Deco X55 wall mountA wall shelf for a TP-Link Deco X55 unit (about 110 × 110 × 114 mm) that raises the mesh node off the floor for better coverage.GoPro motorcycle handlebar mount for 22.2 mm barsA handlebar clamp for 22.2 mm motorcycle bars that carries a GoPro on a three-prong mount (prongs about 3 mm thick, 5 mm bolt hole), set 30 mm above the bar…Wall holder for a 10 inch tabletA slim wall dock that turns a tablet into a fixed control panel for a smart home dashboard.Scotty rod holder base adapter for kayak trackA plate that lets a Scotty 241 or 244 round deck mount, and therefore any Scotty rod holder, bolt onto the 25 mm gear track found on Oru Kayak, Perception, O…Nintendo Switch OLED dock wall mount holderA wall bracket that holds the Nintendo Switch dock beside or behind a TV so the console docks vertically and the HDMI, power and USB cables stay hidden.