1
Organizers & storage
Gridfinity bin for HSS drill bits 1 to 10 mm
This is not a fixed STL. SpeakCAD generates the gridfinity bin for hss drill bits 1 to 10 mm to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a 3×1 Gridfinity bin, 6 units tall, 19 holes for 1 to 10 mm drill bits in 0.5 mm steps, each plus 0.4 mm, 20 mm deep, embossed sizes.
What a gridfinity bin for hss drill bits 1 to 10 mm is
A 3 × 1 Gridfinity bin (125.5 × 41.5 mm, 6 units tall) for a 19-piece metric HSS drill set from 1 to 10 mm in 0.5 mm steps. Bits stand in two staggered rows of holes 0.4 mm larger than each size and 20 mm deep, with the size embossed beside each hole. Print in PLA at 0.16 mm; the tall walls keep long jobber bits upright.
Imperial sets (1/16 to 3/8 inch) do not match these holes. Open the bin in SpeakCAD at no cost, change the sizes in the chat or the viewer, then download the STL.
People also search
gridfinity drill bitsgridfinity drill bit holder stldrill bit organizer 3d printhss drill bit stand
Questions people ask about a gridfinity bin for hss drill bits 1 to 10 mm
A 3 × 1 Gridfinity bin (125.5 × 41.5 mm, 6 units tall) for a 19-piece metric HSS drill set from 1 to 10 mm in 0.5 mm steps. Bits stand in two staggered rows of holes 0.4 mm larger than each size and 20 mm deep, with the size embossed beside each hole. Print in PLA at 0.16 mm; the tall walls keep long jobber bits upright.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a 3×1 Gridfinity bin, 6 units tall, 19 holes for 1 to 10 mm drill bits in 0.5 mm steps, each plus 0.4 mm, 20 mm deep, embossed sizes.
Imperial sets (1/16 to 3/8 inch) do not match these holes. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Jewelry tray with ring bars and earring holesA dresser tray combining a ring bar section, a grid of 1.5 mm holes for stud earrings, and a shallow well for bracelets and necklaces.Makita MakPac type 2 insert for impact bit casesA shallow tray for the Makita MakPac Type 2 case (about 395 by 295 mm inside, 105 mm deep) that holds two Makita impact bit cases, a set of 1/4 inch hex nut…Milwaukee Packout Compact Organizer bit railsTwo drop-in rails that turn a Packout Compact Organizer (48-22-8435) into a 1/4 inch hex-bit station with 20 pockets per rail, 6.6 mm hex by 12 mm deep.IKEA SKÅDIS 65 mm spray-can holderA SKÅDIS peg that holds a 65 mm spray can (paint, dry lube, contact cleaner) so it is not on the bench.Creality Ender-3 V3 SE scraper holderA holder that bolts onto the 2040 upright of a Creality Ender-3 V3 SE and keeps the scraper within reach.Pegboard rack for Wiha screwdriversA pegboard shelf for eight Wiha SoftFinish screwdrivers.