1
Organizers & storage
Gridfinity bin for a 150 mm digital caliper
This is not a fixed STL. SpeakCAD generates the gridfinity bin for a 150 mm digital caliper to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a 6×3 Gridfinity bin, 3 units tall, 240×80×18 mm caliper pocket with finger scoop at the display, spare SR44 battery slot.
What a gridfinity bin for a 150 mm digital caliper is
A 6 × 3 Gridfinity bin (251.5 × 125.5 mm, 3 units tall) with a cut-out for a 150 mm digital caliper, about 235 mm long and 75 mm across the jaws. The pocket is 240 × 80 mm and 18 mm deep with a finger scoop at the display, and a side channel takes a spare SR44 battery. Print the base on the plate in PLA; split it in two if your bed is under 256 mm.
Dial calipers have a round dial that sits higher than the pocket. The model opens free in SpeakCAD; edit any millimetre in the viewer or the chat, then download the STL.
People also search
gridfinity calipergridfinity caliper holder stldigital caliper storage 3d printcaliper case gridfinity
Questions people ask about a gridfinity bin for a 150 mm digital caliper
A 6 × 3 Gridfinity bin (251.5 × 125.5 mm, 3 units tall) with a cut-out for a 150 mm digital caliper, about 235 mm long and 75 mm across the jaws. The pocket is 240 × 80 mm and 18 mm deep with a finger scoop at the display, and a side channel takes a spare SR44 battery. Print the base on the plate in PLA; split it in two if your bed is under 256 mm.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a 6×3 Gridfinity bin, 3 units tall, 240×80×18 mm caliper pocket with finger scoop at the display, spare SR44 battery slot.
Dial calipers have a round dial that sits higher than the pocket. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Tiered nail polish display rackA stadium-style shelf that stands nail polish bottles in three rising rows so every shade is visible.Ninja Creami pint lid and cup holder rackA rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door.SMD reel holder 8, 12 and 16 mmA bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges.IKEA BROR pegboard hook adapterAn adapter that lets a 6 mm pegboard hook sit in the BROR side-panel holes (about 10 mm) so you can hang tools on the trolley.Tesla Model 3 Highland key card console holderA slim holder for a spare Tesla key card (credit-card size, 85.6 × 54 × 0.8 mm) that sticks inside the Model 3 Highland centre console so the card is always…French cleat shelf for a Stanley No. 4 hand planeA plane shelf for a Stanley or Record No.