1
Brackets & mounts
GoPro motorcycle helmet chin mount
This is not a fixed STL. SpeakCAD generates the gopro motorcycle helmet chin mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a GoPro helmet chin mount, 70×40 mm plate with 120 mm radius, 2 mm VHB recess, three-prong GoPro fingers 20 mm forward, PETG.
What a gopro motorcycle helmet chin mount is
A curved chin plate for full-face motorcycle helmets that carries a GoPro HERO camera below the visor for a rider's-eye view. The plate is 70 × 40 mm with a 120 mm radius to follow most chin bars, a 2 mm recess takes a 3M VHB pad, and it ends in a three-prong GoPro mount (prongs about 3 mm thick, 5 mm bolt hole) set 20 mm forward. Print on its back in PETG or ASA; TPU is too soft for a camera at speed.
Modular helmets flip the chin bar up, so check the mount clears the hinge. Open the ready-made mount in SpeakCAD for free, change the curve or any millimetre in the viewer or the chat, then download the STL.
People also search
gopro chin mountmotorcycle helmet chin mount stlgopro helmet mount 3d printfull face helmet gopro mount
Questions people ask about a gopro motorcycle helmet chin mount
A curved chin plate for full-face motorcycle helmets that carries a GoPro HERO camera below the visor for a rider's-eye view. The plate is 70 × 40 mm with a 120 mm radius to follow most chin bars, a 2 mm recess takes a 3M VHB pad, and it ends in a three-prong GoPro mount (prongs about 3 mm thick, 5 mm bolt hole) set 20 mm forward. Print on its back in PETG or ASA; TPU is too soft for a camera at speed.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a GoPro helmet chin mount, 70×40 mm plate with 120 mm radius, 2 mm VHB recess, three-prong GoPro fingers 20 mm forward, PETG.
Modular helmets flip the chin bar up, so check the mount clears the hinge. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
iPad mini car headrest mount for back seatA rear-seat holder for the iPad mini (195.4 x 134.8 x 6.3 mm) that clamps to the two headrest posts so children can watch films in landscape.Tesla NACS mobile connector wall holster and cable hookA holster for the Tesla NACS plug on the Mobile Connector or Wall Connector, with a separate hook for the 6 m cable and a shelf for the control box.UniFi G6 Instant corner mountA corner mount that aims a G6 Instant at 45 degrees across a porch, 80 × 40 × 40 mm with the official 4-hole pattern.TMC2209 stepper driver cooling bracketA bracket that holds a 40 × 40 mm fan over up to four StepStick TMC2209 drivers (15.2 × 20.3 mm each) on a mainboard.myenergi zappi Type 2 cable hangerA cable hanger for an untethered myenergi zappi (439 × 282 × 122 mm) that stores a Type 2 lead on the wall next to it.Logitech C920 monitor top shelfA small shelf that sits on top of a monitor and gives a Logitech C920 or C922 (camera body 94 × 29 × 24 mm) a flat, level base instead of its folding clip.