1
Brackets & mounts
GoPro bike saddle rail mount
This is not a fixed STL. SpeakCAD generates the gopro bike saddle rail mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a GoPro saddle rail mount, clamps 7 mm rails 42 mm apart with two M4 bolts, rear-facing three-prong GoPro mount 25 mm below, PETG.
What a gopro bike saddle rail mount is
A saddle rail clamp with a GoPro mount facing backward, for filming the road behind or mounting a rear light that uses GoPro prongs. It clamps 7 mm round rails (7 × 9 mm carbon with a swap insert) about 42 mm apart with two M4 bolts, and the three-prong mount (prongs about 3 mm thick, 5 mm bolt hole) hangs 25 mm below the rails. Print in PETG with 5 walls.
A bulky saddle bag may cover the camera, so check the view before riding. Open the ready-made mount in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
gopro saddle rail mountgopro seat rail mount stlrear facing gopro bike mountgopro saddle mount 3d print
Questions people ask about a gopro bike saddle rail mount
A saddle rail clamp with a GoPro mount facing backward, for filming the road behind or mounting a rear light that uses GoPro prongs. It clamps 7 mm round rails (7 × 9 mm carbon with a swap insert) about 42 mm apart with two M4 bolts, and the three-prong mount (prongs about 3 mm thick, 5 mm bolt hole) hangs 25 mm below the rails. Print in PETG with 5 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a GoPro saddle rail mount, clamps 7 mm rails 42 mm apart with two M4 bolts, rear-facing three-prong GoPro mount 25 mm below, PETG.
A bulky saddle bag may cover the camera, so check the view before riding. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
70mai A810 rearview mirror stem mountA clamp that wraps the rearview mirror stem and gives the 70mai A810 dashcam a flat plate for its adhesive bracket, so the camera hides behind the mirror wit…Wall bracket for a 32 mm pipeA two-screw saddle bracket that holds a 32 mm round pipe or tube flush against a wall, useful for waste pipes, indoor garden lines or a curtain-weight dowel.Petzl headlamp mount for bike helmet ventsA plate that threads onto the elastic headband of a Petzl Actik, Tikka or Swift RL and then hooks into the vent slots of a road or MTB helmet, so the same la…Owlet Dream Sock base station wall mountA cradle that holds the Owlet Dream Sock or Smart Sock 3 base station on the nursery wall at eye level so the glowing ring is visible from the door and the c…Dyson V10 cyclone tool railA rail that hangs four V10 click-in tools beside the official wall dock so the crevice, combination and mini-motorhead are not on the floor.DS18B20 probe pipe clip for 22 mm pipesA snap clip that presses a waterproof DS18B20 probe (6 mm stainless tube, about 50 mm long) against a 22 mm heating or hot water pipe, for flow and return re…