1
Brackets & mounts
Garmin Varia RTL515 saddle rail mount
This is not a fixed STL. SpeakCAD generates the garmin varia rtl515 saddle rail mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Garmin Varia saddle rail mount, clamps 7 mm rails 42 mm apart with two M4 bolts, quarter-turn tab facing straight back, PETG.
What a garmin varia rtl515 saddle rail mount is
A mount that clamps to the saddle rails and hangs a Garmin Varia RTL515 radar below the saddle, for bikes with a short exposed seatpost or a saddle bag in the way. It grips 7 mm round rails (or 7 × 9 mm carbon with a swap insert) spaced about 42 mm apart, closes with two M4 bolts, and ends in a Garmin quarter-turn tab angled so the radar faces straight back. Print in PETG with 100 percent infill in the tab.
The RTL515 and RCT715 share the quarter-turn tab, but the heavier RCT715 needs a stiffer arm. Open the ready-made mount in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
garmin varia saddle rail mountvaria rtl515 mount stlvaria radar saddle mount 3d printgarmin varia mount saddle rails
Questions people ask about a garmin varia rtl515 saddle rail mount
A mount that clamps to the saddle rails and hangs a Garmin Varia RTL515 radar below the saddle, for bikes with a short exposed seatpost or a saddle bag in the way. It grips 7 mm round rails (or 7 × 9 mm carbon with a swap insert) spaced about 42 mm apart, closes with two M4 bolts, and ends in a Garmin quarter-turn tab angled so the radar faces straight back. Print in PETG with 100 percent infill in the tab.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Garmin Varia saddle rail mount, clamps 7 mm rails 42 mm apart with two M4 bolts, quarter-turn tab facing straight back, PETG.
The RTL515 and RCT715 share the quarter-turn tab, but the heavier RCT715 needs a stiffer arm. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Aqara Hub M3 under-shelf clipA clip that hides an Aqara Hub M3 under a 12–24 mm shelf with the USB-C facing out.HX711 load cell mount plateA pair of plates for a bar load cell (80 × 12.7 × 12.7 mm, 1–20 kg) read by an HX711 board (about 34 × 21 mm).Easee One charge cable wall hookA wall hook for the loose Type 2 cable of an Easee One or Easee Home charger (256 × 193 × 106 mm), sized to sit under the unit's back plate.Canon EOS R6 Mark II Arca-Swiss plateA low-profile Arca-Swiss plate for the Canon EOS R6 Mark II (138.4 × 98.4 × 88.4 mm).Google Pixel 9 Pro XL shower phone holder suctionA splash-tolerant cradle that holds a Google Pixel 9 Pro XL (162.8 x 76.6 x 8.5 mm) on shower tiles for podcasts and playlists.Wall Control pegboard hook for Milwaukee M12 toolsA cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, wi…