1
Organizers & storage
French cleat screwdriver rack, 12 slots
This is not a fixed STL. SpeakCAD generates the french cleat screwdriver rack, 12 slots to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a French cleat screwdriver rack, 250×80 mm, six 7 mm front slots and six 10 mm back slots on a 40 mm pitch, 45 degree cleat.
What a french cleat screwdriver rack, 12 slots is
A 12-slot French cleat screwdriver rack in two rows. Front slots are 7 mm wide for precision and small drivers, back slots 10 mm for shafts up to 8 mm, on a 40 mm pitch so handles up to about 38 mm sit side by side. It is 250 × 80 mm with a 45 degree cleat for 19 mm plywood. Print on its back in PETG.
Demolition drivers with hex bolsters jam in 10 mm slots; widen one slot. Open the rack in SpeakCAD for free, adjust any slot in the chat or the viewer, then download the STL.
People also search
french cleat screwdriver holderscrewdriver rack stlscrewdriver organizer wallscrewdriver holder 3d print
Questions people ask about a french cleat screwdriver rack, 12 slots
A 12-slot French cleat screwdriver rack in two rows. Front slots are 7 mm wide for precision and small drivers, back slots 10 mm for shafts up to 8 mm, on a 40 mm pitch so handles up to about 38 mm sit side by side. It is 250 × 80 mm with a 45 degree cleat for 19 mm plywood. Print on its back in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a French cleat screwdriver rack, 250×80 mm, six 7 mm front slots and six 10 mm back slots on a 40 mm pitch, 45 degree cleat.
Demolition drivers with hex bolsters jam in 10 mm slots; widen one slot. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Handheld gaming PC shelf with three slotsA desk shelf that stands three handheld PCs upright on their bottom edge, sized for a Steam Deck OLED (49 mm deep), a Legion Go S (about 44 mm) and a ROG All…Gridfinity bin for 64 iFixit 4 mm precision bitsA 2 × 2 Gridfinity bin (83.5 × 83.5 mm, 4 units tall) holding 64 precision bits with the 4 mm hex shank used by iFixit Mako and Moray kits.Tiered nail polish display rackA stadium-style shelf that stands nail polish bottles in three rising rows so every shade is visible.Ninja Creami pint lid and cup holder rackA rack that stores the spare pint containers and lids for a Ninja Creami NC300 or NC500 so they are not stacked loose in the freezer door.SMD reel holder 8, 12 and 16 mmA bench stand that holds three SMD reels (8, 12, 16 mm tape) on 12 mm axles with 0.3 mm flanges.IKEA BROR pegboard hook adapterAn adapter that lets a 6 mm pegboard hook sit in the BROR side-panel holes (about 10 mm) so you can hang tools on the trolley.