1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Everyday fixes
Ford F-150 Lightning console tray
This is not a fixed STL. SpeakCAD generates the ford f-150 lightning console tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a ford f-150 lightning console tray is
A tray that sits in the Lightning centre-console well (about 220 × 110 mm) and holds a phone, a USB-C cable and coins so they do not rattle on the trail. The plate is 216 × 106 × 18 mm. Print in PETG with 1.6 mm walls.
A generic truck tray misses the Lightning phone slot. Tell SpeakCAD SuperCrew vs SuperCab, preview the tray in the browser at no cost, then download the STL.
Example prompt
Design an F-150 Lightning console tray 216×106×18 mm with phone, USB-C and coin wells, 1.6 mm PETG.
People also search
f150 lightning tray stllightning console organizer 3d printf-150 lightning insertlightning phone tray 3d model
Questions people ask about a ford f-150 lightning console tray
A tray that sits in the Lightning centre-console well (about 220 × 110 mm) and holds a phone, a USB-C cable and coins so they do not rattle on the trail. The plate is 216 × 106 × 18 mm. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an F-150 Lightning console tray 216×106×18 mm with phone, USB-C and coin wells, 1.6 mm PETG.
A generic truck tray misses the Lightning phone slot. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More everyday fixes
Frame bag clip for top tubeTop-tube bags held by velcro straps slide and scuff the paint, while a rigid clip holds them square.Slotted soap dish with drain channelBar soap turns to mush in a flat dish, while a slotted tray drains water and lets air reach the underside.Leatherman Wave belt clip sheath holsterA rigid kydex-style holster for the Leatherman Wave+, Charge or Surge that clips onto a 40 mm belt or a MOLLE column and lets the tool drop into your palm wi…Nanit Pro floor-stand weight plateA 160 mm plate that adds printed mass and a 8 mm rubber-foot set under a Nanit floor stand so it does not walk.Away Bigger Carry-On handle AirTag clipA clip that hides an AirTag on an Away Bigger Carry-On trolley handle, 32 mm well and a 20 mm snap.Volvo EX30 console coin wellA well that sits in the EX30 centre console (about 140 × 80 mm) and holds coins, a card and a USB-C tip.