1
Desk & office
Focusrite Scarlett 2i2 4th gen under-desk mount
This is not a fixed STL. SpeakCAD generates the focusrite scarlett 2i2 4th gen under-desk mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an under-desk sleeve for a Scarlett 2i2 4th gen, 182×118×48 mm inside, open front and back, four 4 mm countersunk holes, 2.4 mm walls.
What a focusrite scarlett 2i2 4th gen under-desk mount is
An under-desk sleeve that keeps a Focusrite Scarlett 2i2 4th gen (about 180 × 116 × 46 mm) off the desk with the front panel facing you. The sleeve is 182 × 118 × 48 mm inside, open at the front and back for the knobs and rear jacks, with four 4 mm countersunk screw holes on top. Walls are 2.4 mm. Print on its back in PETG.
The 3rd gen 2i2 is a few millimetres smaller and slides around, while the Solo is much narrower; tell the chat which one you own. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
scarlett 2i2 under desk mount stlfocusrite 2i2 4th gen mount 3d printaudio interface under desk holderscarlett 2i2 bracket
Questions people ask about a focusrite scarlett 2i2 4th gen under-desk mount
An under-desk sleeve that keeps a Focusrite Scarlett 2i2 4th gen (about 180 × 116 × 46 mm) off the desk with the front panel facing you. The sleeve is 182 × 118 × 48 mm inside, open at the front and back for the knobs and rear jacks, with four 4 mm countersunk screw holes on top. Walls are 2.4 mm. Print on its back in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an under-desk sleeve for a Scarlett 2i2 4th gen, 182×118×48 mm inside, open front and back, four 4 mm countersunk holes, 2.4 mm walls.
The 3rd gen 2i2 is a few millimetres smaller and slides around, while the Solo is much narrower; tell the chat which one you own. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Airspy HF+ Discovery desk standA stand that holds an HF+ Discovery at 20 degrees with SMA clearance and a 14 mm USB slot.Mac mini M4 rear cable combA comb that clips onto the rear edge of a Mac mini M4 and separates HDMI, two Thunderbolt cables and power so they do not unplug when you slide the mini.Logitech MX Ergo S trackball wedgeA 20 degree wedge under an MX Ergo S (about 138 × 100 × 50 mm) so the thumb ball sits higher than the stock 0–20 click.Insta360 X4 desk standA weighted desk stand that holds an Insta360 X4 (46 × 123.6 × 37.6 mm) upright by its 1/4-20 base thread, so it records clean 360 video on a table.Samsung Galaxy Watch charger puck holder for deskAn upright holder for the round Samsung Galaxy Watch wireless charging puck, so a Galaxy Watch 6 or 7 sits on its side charging instead of lying face down on…Galaxy Tab S10 Ultra easel standAn easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin…