1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Dyson Gen5detect Fluffy head wall hook
This is not a fixed STL. SpeakCAD generates the dyson gen5detect fluffy head wall hook to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson gen5detect fluffy head wall hook is
A hook that hangs the Gen5detect Fluffy soft roller (about 250 mm wide) next to the dock so the roller is not crushed in a cupboard. The saddle is 40 mm and two 4.5 mm holes sit on 80 mm centres. Print in PETG with 2.4 mm walls.
Leaning the Fluffy head on the wand bends the roller. In SpeakCAD you confirm Fluffy vs Digital Motorbar, preview the hook in the browser without paying, then download the STL.
Example prompt
Model a Gen5detect Fluffy wall hook, 40 mm saddle, two 4.5 mm holes on 80 mm centres, 2.4 mm PETG.
People also search
dyson gen5 fluffy hook stlgen5detect fluffy holder 3d printdyson fluffy head wall mountgen5 soft roller hook 3d model
Questions people ask about a dyson gen5detect fluffy head wall hook
A hook that hangs the Gen5detect Fluffy soft roller (about 250 mm wide) next to the dock so the roller is not crushed in a cupboard. The saddle is 40 mm and two 4.5 mm holes sit on 80 mm centres. Print in PETG with 2.4 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Gen5detect Fluffy wall hook, 40 mm saddle, two 4.5 mm holes on 80 mm centres, 2.4 mm PETG.
Leaning the Fluffy head on the wand bends the roller. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Dyson V12 Detect Slim tool clipA clip that snaps a V12 Detect Slim crevice or combination tool onto the wand so it travels with the vacuum.Bose SoundLink Flex 2 bike mountA mount that holds a SoundLink Flex 2 (about 90 × 51 × 201 mm) on a 22.2 or 31.8 mm handlebar so a picnic ride has a speaker.iPhone 16 Pro Max car vent mount with MagSafe cutoutA cradle that hooks over a horizontal dashboard vent slat and holds an iPhone 16 Pro Max (163 x 77.6 x 8.25 mm) in portrait or landscape.Kettlebell wall rack hook for garage gymA hook that hangs a light kettlebell (up to about 12 kg) by its handle against a garage wall, freeing floor space beside the squat rack.Wall Control pegboard hook for Milwaukee M12 toolsA cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, wi…Pixel 10 Pro XL out-front bike mountAn out-front handlebar mount for a Pixel 10 Pro XL (about 163 × 77 × 8.6 mm) with a 22.2 / 31.8 mm clamp and a 70 mm deep cradle that clears the Camera Bar.