1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Kitchen & home
Dyson Airwrap barrel drying tree
This is not a fixed STL. SpeakCAD generates the dyson airwrap barrel drying tree to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson airwrap barrel drying tree is
A tree that stands four Airwrap barrels nozzle-up after you wipe them so water does not sit in the magnet. The trunk is 160 mm tall with four 22 mm pegs on 50 mm centres and a 90 mm base. Print in PETG with 2 mm walls.
The wall rack is for storage, not wet barrels. Describe 30 vs 40 mm barrels in SpeakCAD, preview the tree in the browser for free, then download the STL.
Example prompt
Create an Airwrap barrel drying tree 90 mm base, 160 mm tall, four 22 mm pegs on 50 mm centres, 2 mm PETG.
People also search
airwrap drying tree stldyson airwrap barrel dryer 3d printairwrap barrel stand treedyson barrel drying rack 3d model
Questions people ask about a dyson airwrap barrel drying tree
A tree that stands four Airwrap barrels nozzle-up after you wipe them so water does not sit in the magnet. The trunk is 160 mm tall with four 22 mm pegs on 50 mm centres and a 90 mm base. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create an Airwrap barrel drying tree 90 mm base, 160 mm tall, four 22 mm pegs on 50 mm centres, 2 mm PETG.
The wall rack is for storage, not wet barrels. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Snap-close chip bag sealing clipsA set of bag clips that seal crisps, cereal and frozen vegetables shut.Custom shape cookie cutter with stampA cookie cutter made from any outline you describe, with a sharp cutting edge on one side and a wide pressing flange on the other so dough releases cleanly.Vitamix tamper holder clip for the container baseA clip that holds the Vitamix tamper upright next to the motor base so it is never rolling around a drawer or lying wet on the counter.Fellow Stagg EKG drip-tray gridA 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.Dyson Airwrap i.d. barrel wall rackA wall rack that parks the four Airwrap i.d.Instant Pot Duo Plus lid wall holderA holder that hangs a Duo Plus lid (about 240 mm) on a cabinet door so the sealing ring dries and the lid is not on the hob.