1
Brackets & mounts
Camera cage HDMI cable clamp
This is not a fixed STL. SpeakCAD generates the camera cage hdmi cable clamp to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an HDMI cable clamp for a camera cage, 1/4-20 mount hole with a 3 mm pin, 12 mm jaw with an 8 mm cable channel, thumbscrew closure.
What a camera cage hdmi cable clamp is
A clamp that locks a full-size HDMI cable next to the camera port so a tug on the cable does not break the socket. The clamp bolts to the cage with one 1/4-20 screw and a 3 mm anti-twist pin, the jaw is 12 mm long with an 8 mm cable channel for 6 to 8 mm cables, and a thumbscrew closes it. Print in PETG with the jaw flat on the bed.
A micro-HDMI lead is much thinner (about 4.5 mm), so the channel will not grip it; ask the chat for a 5 mm channel. Open the ready-made model in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
hdmi cable clamp camera cage stlhdmi lock 3d printcamera hdmi cable protectorcage cable clamp 3d model
Questions people ask about a camera cage hdmi cable clamp
A clamp that locks a full-size HDMI cable next to the camera port so a tug on the cable does not break the socket. The clamp bolts to the cage with one 1/4-20 screw and a 3 mm anti-twist pin, the jaw is 12 mm long with an 8 mm cable channel for 6 to 8 mm cables, and a thumbscrew closes it. Print in PETG with the jaw flat on the bed.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an HDMI cable clamp for a camera cage, 1/4-20 mount hole with a 3 mm pin, 12 mm jaw with an 8 mm cable channel, thumbscrew closure.
A micro-HDMI lead is much thinner (about 4.5 mm), so the channel will not grip it; ask the chat for a 5 mm channel. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
SP Connect handlebar clamp for 22.2 to 28.6 mm barsA two-piece handlebar clamp for 22.2 mm (7/8 inch), 25.4 mm (1 inch) and 28.6 mm fat motorcycle bars, with a 40 × 40 mm flat top pad drilled so a store-bough…Wall mount clips for a power stripA pair of C-shaped clips that screw to a wall or cabinet side and let a power strip slide in and stay put, so it stops dangling from its cord.Hex dumbbell wall mount holder bracketA pair of wall brackets that cradle a rubber hex dumbbell by its handle so a small home gym stays off the floor.Meta Quest 3 headset wall hanger with strap restA wall hanger that carries a Meta Quest 3 (184 x 160 x 98 mm with the strap folded, about 515 g) by its facial interface bar, with a second, higher arm that…Dyson Gen5detect Hair Screw holsterA holster that hangs the Gen5detect Hair Screw tool on the wall dock so pet hair is not the thing left on the floor.Sonoff ZBDongle-P USB extension holderA wall holder for a Sonoff ZBDongle-P (about 65 × 27 × 11 mm without the antenna) on a USB extension cable, so the coordinator sits 1 m away from the USB 3 p…