1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Bose SoundLink Flex 2 bike mount
This is not a fixed STL. SpeakCAD generates the bose soundlink flex 2 bike mount to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bose soundlink flex 2 bike mount is
A mount that holds a SoundLink Flex 2 (about 90 × 51 × 201 mm) on a 22.2 or 31.8 mm handlebar so a picnic ride has a speaker. The cradle is 92 × 54 mm with a 3 mm band groove. Print the clamp in PETG with an M5 bolt.
A bottle-cage mount lets the Flex walk. Describe bar diameter in SpeakCAD, preview the mount in the browser without paying, then download the STL.
Example prompt
Model a SoundLink Flex 2 bike mount, 92×54 mm cradle, 3 mm band groove, 31.8 mm clamp with M5 bolt, PETG.
People also search
soundlink flex 2 mount stlbose flex 2 bike holder 3d printflex 2 handlebar mountbose flex bicycle speaker 3d model
Questions people ask about a bose soundlink flex 2 bike mount
A mount that holds a SoundLink Flex 2 (about 90 × 51 × 201 mm) on a 22.2 or 31.8 mm handlebar so a picnic ride has a speaker. The cradle is 92 × 54 mm with a 3 mm band groove. Print the clamp in PETG with an M5 bolt.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a SoundLink Flex 2 bike mount, 92×54 mm cradle, 3 mm band groove, 31.8 mm clamp with M5 bolt, PETG.
A bottle-cage mount lets the Flex walk. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
iPhone 15 stroller handlebar phone mount clampA two-piece clamp that bolts around a stroller or buggy handlebar between 25 and 32 mm in diameter and carries an iPhone 15 (147.6 x 71.6 x 7.8 mm) where you…Philips Hue motion sensor corner mount bracketA wedge that lets the Philips Hue motion sensor sit in the corner of a room, where its field of view covers the whole space.Gillette Fusion razor wall holder with adhesive padA wall holder that grips a Gillette Fusion, ProGlide or Harry's Truman handle by its neck so the cartridge hangs in the air and dries instead of rusting on t…Starlink Mini window suction mountA window mount that holds a Starlink Mini (about 298 × 259 × 39 mm) on two 80 mm suction cups so you can park-and-stay without drilling.Dyson V12 Detect crevice wand clipA clip that snaps the longer V12 Detect crevice tool onto the slim wand, 38 × 26 × 16 mm with a 30 mm tool saddle and a 34 mm wand snap.Wall bracket for a 32 mm pipeA two-screw saddle bracket that holds a 32 mm round pipe or tube flush against a wall, useful for waste pipes, indoor garden lines or a curtain-weight dowel.