1
Replacement parts
Bosch oven knob for 6 mm D-shaft
This is not a fixed STL. SpeakCAD generates the bosch oven knob for 6 mm d-shaft to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Bosch oven knob, 38 mm diameter 22 mm deep, 6.1 mm D-bore with 4.7 mm flat 12 mm deep, raised pointer, ASA.
What a bosch oven knob for 6 mm d-shaft is
A replacement control knob for Bosch and Siemens ovens that use a 6 mm D-shaft with a 4.6 mm flat. The knob is 38 mm across and 22 mm deep, the bore is 6.1 mm with the flat at 4.7 mm and 12 mm deep, and a raised pointer line marks the setting. Print in PETG or ASA, face down, for heat near the oven door.
Bosch push-pop knobs have a spring cup inside and need the original mechanism. The ready-made knob opens free in SpeakCAD; change the diameter or pointer in the viewer or the chat, then download the STL.
People also search
bosch oven knob replacementsiemens oven knob 3d printbosch oven knob stlbosch cooker control knob
Questions people ask about a bosch oven knob for 6 mm d-shaft
A replacement control knob for Bosch and Siemens ovens that use a 6 mm D-shaft with a 4.6 mm flat. The knob is 38 mm across and 22 mm deep, the bore is 6.1 mm with the flat at 4.7 mm and 12 mm deep, and a raised pointer line marks the setting. Print in PETG or ASA, face down, for heat near the oven door.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Bosch oven knob, 38 mm diameter 22 mm deep, 6.1 mm D-bore with 4.7 mm flat 12 mm deep, raised pointer, ASA.
Bosch push-pop knobs have a spring cup inside and need the original mechanism. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
LG dishwasher lower rack rollerA lower rack roller for LG dishwashers, the snap-on wheel that goes missing from the bottom rack (about 30 mm across on most QuadWash models).KitchenAid mixer speed lever knobA replacement end knob for the speed control lever of KitchenAid stand mixers, the small plastic cap that cracks or falls off the metal lever.Stroller wheel hub capA lost hub cap lets grit into a stroller wheel bearing and exposes a sharp axle end, and manufacturers seldom sell the cap alone.Track-saw splinter-guard replacement stripA 1400 mm splinter-guard strip in 200 mm sections that clip onto a Festool / Makita style track's 4 mm T-slot.IKEA IVAR 6 mm shelf-pin replacementA 6 mm pin that replaces a lost IVAR metal pin so a pine shelf sits level in the 30 or 50 cm side unit.Prusa MINI+ riser feetFour riser feet for a Prusa MINI+ (base of about 330 × 340 mm) that lift it 25 mm, give the display a better viewing angle and let you tidy cables underneath.