1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Adapters & couplers
Bosch GKS 18V track dust-port adapter
This is not a fixed STL. SpeakCAD generates the bosch gks 18v track dust-port adapter to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bosch gks 18v track dust-port adapter is
An adapter from a GKS 18V-68 GC dust port (about 35 mm) to a 27 mm Festool or 36 mm shop-vac hose. The step is 40 mm long with 0.2 mm tapers. Print in PETG with 1.6 mm walls.
Tape as an adapter collapses. In SpeakCAD you name both IDs, preview the step in the browser without paying, then download the STL.
Example prompt
Model a GKS 18V dust-port adapter, 35 mm saw to 27 or 36 mm hose, 40 mm long, 0.2 mm tapers, 1.6 mm PETG.
People also search
bosch gks dust adapter stlgks 18v hose adapter 3d printbosch track saw dust portgks 18v 27mm adapter 3d model
Questions people ask about a bosch gks 18v track dust-port adapter
An adapter from a GKS 18V-68 GC dust port (about 35 mm) to a 27 mm Festool or 36 mm shop-vac hose. The step is 40 mm long with 0.2 mm tapers. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a GKS 18V dust-port adapter, 35 mm saw to 27 or 36 mm hose, 40 mm long, 0.2 mm tapers, 1.6 mm PETG.
Tape as an adapter collapses. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More adapters & couplers
LoRa 868 MHz antenna mast clip for 25 mm poleA clip that fixes an SMA-mount 868 or 915 MHz LoRa whip antenna to a 25 mm pole so a Meshtastic or Helium node gets height and a clear view.Shower caddy hook adapter for a 19 mm shower railAn adapter that lets an over-the-showerhead caddy from Simplehuman, OXO or IKEA hang from the vertical riser rail instead, when the shower head is too low or…Sony ZV-E10 II cage with Arca plateA three-sided cage for a Sony ZV-E10 II (about 121 × 68 × 54 mm body) with a 38 mm Arca-Swiss dovetail on the base, a cold shoe on top, and cutouts for the f…RØDE Wireless ME dual cold-shoe sledA sled that holds two Wireless ME transmitters on one camera shoe, 70 × 18 × 12 mm with two ISO 518 pockets.Tube reducer sleeve, 25 mm to 22 mmA stepped sleeve that lets a 22 mm tube plug into the end of a 25 mm tube, useful for extending a curtain pole, joining two lengths of aluminium tubing or fi…PopSocket base to MagSafe ring adapter plateA thin plate that takes a standard PopSocket PopGrip base on one side and a stick-on MagSafe ring on the other, so the grip snaps onto an iPhone 15, 16 or Ga…