1
Replacement parts
Bosch fridge crisper drawer rail
This is not a fixed STL. SpeakCAD generates the bosch fridge crisper drawer rail to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Bosch fridge crisper drawer rail, 440×14×12 mm with 5 mm ledge, two liner clip lugs, split in two with dovetail, PETG.
What a bosch fridge crisper drawer rail is
A runner for the crisper drawer of Bosch and Siemens fridge freezers, the plastic rail that the vegetable drawer slides on. It is about 440 mm long, 14 mm wide and 12 mm tall, with a 5 mm ledge and two clip lugs for the liner slots. Print on its side in PETG, split in two if your bed is under 250 mm.
The freezer drawer rails on the same units are shorter and deeper. Open the ready-made runner in SpeakCAD for free, change the length in the chat or the viewer, then download the STL.
People also search
bosch fridge crisper drawer railbosch fridge drawer runner replacementsiemens crisper drawer rail 3d printbosch vegetable drawer slide stl
Questions people ask about a bosch fridge crisper drawer rail
A runner for the crisper drawer of Bosch and Siemens fridge freezers, the plastic rail that the vegetable drawer slides on. It is about 440 mm long, 14 mm wide and 12 mm tall, with a 5 mm ledge and two clip lugs for the liner slots. Print on its side in PETG, split in two if your bed is under 250 mm.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Bosch fridge crisper drawer rail, 440×14×12 mm with 5 mm ledge, two liner clip lugs, split in two with dovetail, PETG.
The freezer drawer rails on the same units are shorter and deeper. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Voron 2.4 door handle for 3 mm panelsA door handle for the 3 mm acrylic or polycarbonate front doors of a Voron 2.4.Whirlpool dryer timer knobA replacement timer knob for Whirlpool and Kenmore dryers, about 50 mm across and 30 mm deep with a finger bar.Dishwasher rack wheel replacementWhen a lower rack wheel cracks the whole basket drags and jams, yet the original spare often costs more than a set of four printed ones.Salomon Quicklace cord lock replacementSalomon Speedcross, Sense Ride and XA Pro trail shoes use a Quicklace system with a small two-hole cord lock that eventually cracks or loses its spring.Thule EasyFold wheel-tray end capA replacement end cap for a Thule EasyFold wheel tray, 40 × 25 mm with the stock 4 mm rib.IKEA KALLAX insert-drawer stopA stop that keeps a KALLAX drawer insert (33 cm cube) from being pulled out of the cube.