1
Replacement parts
Bambu Lab H2D riser feet
This is not a fixed STL. SpeakCAD generates the bambu lab h2d riser feet to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model four riser feet for a Bambu H2D, 60×60 mm blocks, 30 mm lift, 30 mm pocket for the rubber foot, internal ribs, chamfered edges.
What a bambu lab h2d riser feet is
Heavy-duty riser feet for an H2D (492 × 514 × 626 mm) that lift it 30 mm so the base breathes and a cable can pass underneath. Each foot is a 60 mm square block with a 30 mm pocket for the stock rubber foot, internal ribs every 8 mm and chamfered edges, sized for a printer of about 30 kg. Print in PETG with 5 walls and 40% gyroid, pocket up.
A P1S or X1C foot is much lighter duty and the spacing differs, so do not reuse those. Open the model in SpeakCAD for free, change the lift or the pocket in the viewer or the chat, then download the STL.
People also search
h2d riser feet stlbambu h2d feeth2d printer riser 3d printbambu h2d anti vibration feet
Questions people ask about a bambu lab h2d riser feet
Heavy-duty riser feet for an H2D (492 × 514 × 626 mm) that lift it 30 mm so the base breathes and a cable can pass underneath. Each foot is a 60 mm square block with a 30 mm pocket for the stock rubber foot, internal ribs every 8 mm and chamfered edges, sized for a printer of about 30 kg. Print in PETG with 5 walls and 40% gyroid, pocket up.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model four riser feet for a Bambu H2D, 60×60 mm blocks, 30 mm lift, 30 mm pocket for the rubber foot, internal ribs, chamfered edges.
A P1S or X1C foot is much lighter duty and the spacing differs, so do not reuse those. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
CamelBak bite valve dust cover cap replacementThe hinged dust cover on a CamelBak Big Bite valve or Crux tube gets chewed off or lost on the first ride, leaving the valve to collect trail grit.Roomba j9+ cliff-sensor shimA 1.2 mm shim that sits under a j9+ cliff sensor so dark hardwood is not read as a stair.IKEA IVAR caster adapter plateA plate that lets you bolt a 40 mm caster under an IVAR side unit so the pine shelf becomes a rolling cart.Anycubic Kobra S1 riser feetRiser feet that lift a Kobra S1 25 mm so its bottom vents breathe and the ACE Pro cable can run under it.Bosch washing machine programme knobA replacement programme selector knob for Bosch Serie 4 and Serie 6 washing machines, about 55 mm across and 25 mm deep.Toilet seat hinge cover capsA pair of replacement cover caps for toilet seat hinges, the snap-on covers that hide the fixing bolts on the hinge blocks.