1
Organizers & storage
Bambu Lab A1 mini side spool roller stand
This is not a fixed STL. SpeakCAD generates the bambu lab a1 mini side spool roller stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a side spool roller stand, four 608 bearings on 8 mm axles, for 205 mm spools up to 75 mm wide, PTFE arm with PC4-M10 hole.
What a bambu lab a1 mini side spool roller stand is
A low roller stand that sits next to an A1 mini so the spool feeds from the side rather than from the top of the Z column, handy for heavy 1 kg spools and cardboard spools. Four 608 bearings (22 × 8 × 7 mm) on 8 mm axles carry spools up to 205 mm diameter and 75 mm wide, and a PTFE arm with a PC4-M10 hole guides the filament to the extruder. Print in PETG, base flat.
It fits 1 kg spools, but a 3 kg spool at about 300 mm needs wider roller spacing. Open the stand in SpeakCAD for free, change the roller spacing in the viewer or the chat, then download the STL.
People also search
a1 mini spool holder side stla1 mini spool roller standbambu a1 mini external spool holderspool roller 608 bearing 3d print
Questions people ask about a bambu lab a1 mini side spool roller stand
A low roller stand that sits next to an A1 mini so the spool feeds from the side rather than from the top of the Z column, handy for heavy 1 kg spools and cardboard spools. Four 608 bearings (22 × 8 × 7 mm) on 8 mm axles carry spools up to 205 mm diameter and 75 mm wide, and a PTFE arm with a PC4-M10 hole guides the filament to the extruder. Print in PETG, base flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a side spool roller stand, four 608 bearings on 8 mm axles, for 205 mm spools up to 75 mm wide, PTFE arm with PC4-M10 hole.
It fits 1 kg spools, but a 3 kg spool at about 300 mm needs wider roller spacing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Prusa XL PTFE tube bundle clipA clip that keeps the five 4 mm PTFE tubes of a five-toolhead Prusa XL side by side, so they do not tangle or rub on the frame when the tools swap.IKEA SKADIS tape roll holder for 76 mm coresA SKADIS arm for duct tape, masking tape and painter's tape on the standard 76 mm (3 inch) core.Spade bit wall holder, 6 to 38 mmA wall holder for 13 spade (paddle) bits from 6 to 38 mm on 1/4 inch hex shanks, about 150 mm long.Apple TV, Roku and Fire TV remote holderA sofa-side caddy with three angled slots sized to the remotes that come with streaming boxes.Bose QC Ultra 2 travel case insertA drop-in insert that turns a generic hard case into a Bose QC Ultra 2 (about 170 × 170 × 80 mm folded) nest with a 40 × 20 mm well for the USB-C cable and a…Dyson Supersonic nozzle magnetic caddyA caddy that holds the four Supersonic magnetic nozzles (styling, diffuser, wide-tooth, flyaway) so they stay in one place next to the charger.