1
Garden & outdoor
3-way connector for 10 to 12 mm bamboo canes
This is not a fixed STL. SpeakCAD generates the 3-way connector for 10 to 12 mm bamboo canes to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a 3-way bamboo cane connector, three 13 mm sockets 30 mm deep at 90 degrees, 4 mm cross holes, PETG.
What a 3-way connector for 10 to 12 mm bamboo canes is
A connector that joins three bamboo canes into a corner for net frames and bean supports. Three 13 mm sockets, 30 mm deep, take canes of 10 to 12 mm, and a 4 mm cross hole in each lets you pin or tie a thin cane tight. The sockets sit at 90 degrees. Print in PETG or ASA with 4 walls.
Thick 16 to 18 mm canes need bigger sockets; say so in the chat. Open the ready-made connector in SpeakCAD for free, change the angles in the viewer or the chat, then download the STL.
People also search
bamboo cane connectorgarden cane joiner stlbamboo connector 3d printcane topper corner
Questions people ask about a 3-way connector for 10 to 12 mm bamboo canes
A connector that joins three bamboo canes into a corner for net frames and bean supports. Three 13 mm sockets, 30 mm deep, take canes of 10 to 12 mm, and a 4 mm cross hole in each lets you pin or tie a thin cane tight. The sockets sit at 90 degrees. Print in PETG or ASA with 4 walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a 3-way bamboo cane connector, three 13 mm sockets 30 mm deep at 90 degrees, 4 mm cross holes, PETG.
Thick 16 to 18 mm canes need bigger sockets; say so in the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Self-watering pot insert with wickA self-watering insert sits inside a standard pot and lets a wick draw water up from a reservoir, so plants stay hydrated during a week away.Downspout splash diverterA downspout that empties straight onto the soil erodes a hole and splashes the wall.Specialized Levo SL bottle-cage adapterAn adapter that moves a bottle cage 20 mm off a Levo SL downtube so a 750 ml bottle clears the motor.Kuat NV 2.0 ratchet-handle hookA hook that parks an NV 2.0 ratchet handle so it does not swing into the tailgate, 16 mm snap.Capacitive soil moisture sensor v1.2 capA rain cap for a capacitive soil moisture sensor v1.2 (98 × 23 mm board) that covers the exposed electronics at the top, the part that corrodes first.Rain barrel diverter for 68 mm round downpipeA rainwater diverter that fits into a cut 68 mm round downpipe, the UK and EU standard.