1
Hobby & gaming
Arturia KeyStep 37 angled feet
This is not a fixed STL. SpeakCAD generates the arturia keystep 37 angled feet to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model two clip-on feet for an Arturia KeyStep 37, 60×30 mm, 20 mm channel hooking under the rear edge, 25 mm lift, TPU pad recess.
What a arturia keystep 37 angled feet is
Clip-on feet that raise the back of an Arturia KeyStep 37 (about 559 × 204 × 52 mm) by 25 mm so the keys and sequencer controls tilt towards you. Each foot is 60 × 30 mm with a 20 mm deep channel that hooks under the rear edge, a TPU pad recess and room for the cables. Print two in PETG, on their sides.
The original KeyStep is thinner and shallower, so the channel will be loose. Open the ready-made model in SpeakCAD for free, set the height or channel in the viewer or the chat, then download the STL.
People also search
keystep 37 stand stlarturia keystep feet 3d printkeystep 37 risermidi keyboard feet 3d print
Questions people ask about a arturia keystep 37 angled feet
Clip-on feet that raise the back of an Arturia KeyStep 37 (about 559 × 204 × 52 mm) by 25 mm so the keys and sequencer controls tilt towards you. Each foot is 60 × 30 mm with a 20 mm deep channel that hooks under the rear edge, a TPU pad recess and room for the cables. Print two in PETG, on their sides.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model two clip-on feet for an Arturia KeyStep 37, 60×30 mm, 20 mm channel hooking under the rear edge, 25 mm lift, TPU pad recess.
The original KeyStep is thinner and shallower, so the channel will be loose. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Desk clamp headset hangerA headset hanger clamps to the edge of a desk and holds a gaming headset off the surface where it would otherwise gather cables and crumbs.PlayStation Portal desk stand with cable channelA stand for the PlayStation Portal remote player that supports the grips on either side of its 8 inch screen and tilts it back 20 degrees for a bedside or de…Apple Vision Pro 2 Light Seal standA desk stand that holds Apple Vision Pro 2 (about 200 mm wide) on its Light Seal so the displays stay off the desk.8BitDo Ultimate 2 charging-dock riserA 15 mm riser under an Ultimate 2 dock so a thicker aftermarket grip still seats on the pogo pins.PS VR2 headset stand with Sense controller cradlesA desk stand for a PlayStation VR2 (the headset is about 212 × 158 × 278 mm) with a 90 mm wide rounded head form, 220 mm tall, that carries the weight on the…Sim rig aluminium profile cable clipA snap-in cable clip for 40 series aluminium profile rigs with an 8 mm slot.