1
Replacement parts
Anycubic Kobra 3 ACE Pro PTFE guide arm
This is not a fixed STL. SpeakCAD generates the anycubic kobra 3 ace pro ptfe guide arm to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a PTFE guide arm for a Kobra 3 and ACE Pro, 180 mm tall, 4.1 mm tube clip, 60 mm bend radius, base with two 3 mm lips.
What a anycubic kobra 3 ace pro ptfe guide arm is
A guide arm that lifts the PTFE tube from an ACE Pro above a Kobra 3 (250 × 250 × 260 mm build) so it does not snag the gantry or drag across the bed during long moves. The arm is 180 mm tall with a 4.1 mm tube clip at the top, a 60 mm bend radius and a base that sits on the ACE Pro lid with two 3 mm lips. Print in PETG, flat.
The Kobra S1 is enclosed and uses a different feed path, so this arm is for the Kobra 3. Open the model in SpeakCAD for free, change the arm height in the viewer or the chat, then download the STL.
People also search
kobra 3 ptfe guide stlace pro tube holderanycubic kobra 3 combo ptfe guidekobra 3 ace pro 3d print
Questions people ask about a anycubic kobra 3 ace pro ptfe guide arm
A guide arm that lifts the PTFE tube from an ACE Pro above a Kobra 3 (250 × 250 × 260 mm build) so it does not snag the gantry or drag across the bed during long moves. The arm is 180 mm tall with a 4.1 mm tube clip at the top, a 60 mm bend radius and a base that sits on the ACE Pro lid with two 3 mm lips. Print in PETG, flat.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a PTFE guide arm for a Kobra 3 and ACE Pro, 180 mm tall, 4.1 mm tube clip, 60 mm bend radius, base with two 3 mm lips.
The Kobra S1 is enclosed and uses a different feed path, so this arm is for the Kobra 3. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Bialetti Moka Express lid knobA replacement lid knob for the Bialetti Moka Express, about 20 mm across and 12 mm tall, fixed through the lid with the original screw.Cabinet hinge mounting plate replacementConcealed cabinet hinges clip onto a small mounting plate screwed to the carcass, and when the plate cracks the door sags or falls off.SwitchBot Curtain 3 rod clamp for 28 mm polesA replacement clamp that lets a SwitchBot Curtain 3 ride a 28 mm wooden pole instead of the IKEA 25 mm it shipped with.IKEA BESTÅ 30 mm leg riserA 30 mm riser that screws onto a BESTÅ leg (M8) so a robot mop can pass under the TV unit.Bambu Lab P1S glass door handleA replacement handle for the front glass door of a P1S, for when the stock one cracks or peels off.Whirlpool dishwasher tine row pivot clipA pivot clip for the folding tine rows in Whirlpool and KitchenAid lower racks, which lets the row fold flat and stay on the rack.