Custom parts for the Anycubic Kobra 3: describe them, download G-code sliced for it
From a sentence to the Kobra 3's SD card
The slicer runs on our side with the same profiles OrcaSlicer ships for the Anycubic Kobra 3. You choose the print profile and the filament; the printer settings are already right.Check it on the Kobra 3's bed
The part renders on a virtual bed the size of the Kobra 3's. The first render usually appears within a minute or two: a new part gets deeper reasoning through the geometry, and small edits land in seconds. Turn it, tap a face to read a size, open the dimensions panel, and see whether it has overhangs that need supports. Anything wrong is one sentence to fix.Pick the Anycubic Kobra 3 and its profile
In the download dialog choose the Anycubic Kobra 3 (0.2 nozzle, 0.4 nozzle, 0.6 nozzle, 0.8 nozzle), one of its print profiles (0.08 mm, 0.1 mm, 0.12 mm, 0.16 mm…), a filament, then infill, walls, supports and adhesion. The printer and its last settings are saved to your account.Download and print
You get a .gcode file, ready for the SD card, the USB stick or the printer's own upload page, with the estimated print time and filament weight. Re-slicing a design you already downloaded, with other settings, charges nothing: the G-code costs what the STL costs (included in every plan, 4 credits once without one for a part with AI work in it).The Anycubic Kobra 3 profile SpeakCAD slices with
| Setting | Value |
|---|---|
| Printer | Anycubic Kobra 3 (Anycubic) |
| Printable area in the profile | 255 x 255 x 260 mm |
| Nozzle variants | 0.2 nozzle, 0.4 nozzle, 0.6 nozzle, 0.8 nozzle |
| Layer heights in the print profiles | 0.08 mm, 0.1 mm, 0.12 mm, 0.16 mm, 0.2 mm, 0.24 mm, 0.28 mm, 0.3 mm, 0.4 mm |
| Filament profiles | PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF, plus the OrcaSlicer filament library |
| Download | G-code, or STL and 3MF for your own slicer |
| Slicer | OrcaSlicer, run on our servers with the printer's official profile |
| Your own STL or 3MF | The online slicer: .gcode with this profile, free with a free account (up to 10 files a day) |
Prompts sized for the Kobra 3
Copy one, change the numbers to yours. Each opens in the editor with the text already typed.“A PTFE guide arm for an Anycubic Kobra 3 with ACE Pro: 120 mm arm that clips to the 20 mm top extrusion, two 4 mm tube holes 15 mm apart at the tip, 2.4 mm walls.”
Open this prompt in the editor“A spool holder for the Kobra 3 frame: two 608 bearing rollers 80 mm apart for a 200 mm spool, clips on the 20 x 40 extrusion, 2.4 mm walls.”
Open this prompt in the editor“A hinged box 120 x 80 x 40 mm with a print-in-place hinge (0.4 mm clearance), a snap latch on the front, 1.6 mm walls, for PLA.”
Open this prompt in the editorWhy Kobra 3 owners do not need a slicer on the phone
Slicing is the step that keeps 3D printing on the desktop: a design made anywhere still has to pass through Bambu Studio, PrusaSlicer or Cura on a computer. SpeakCAD runs OrcaSlicer on its own servers with the profile OrcaSlicer ships for the Anycubic Kobra 3, so the phone that typed the description also downloads G-code. The desktop slicer stays the better choice for arranging many parts on one bed or for exotic settings; for one part at a time, the download dialog covers the profile, the filament, infill, walls, supports and adhesion.
Slice your own STL for the Kobra 3
Already have the file, a Printables or MakerWorld download or a part from your own CAD? The online slicer slices an STL or 3MF of up to 50 MB with the same Anycubic Kobra 3 profile, without the AI: layer heights from 0.08 to 0.4 mm across its nozzles, filament presets for PLA, PETG, ABS, ASA, TPU, PLA-CF, PETG-CF, PC, PA, PA-CF, infill, supports, walls and bed adhesion. You download a .gcode file, with the print time and filament weight. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day. Open the online slicer.
Parts that fit the Kobra 3
The Anycubic Kobra 3's 255 x 255 mm bed and 260 mm height are what the virtual bed in the viewer shows, so a part that looks too big is too big. Ask for a part to be split into two halves with alignment pins when it does not fit, or for a flat print orientation when it would need supports. The examples above and the library parts below all fit.
Parts that fit the first time
The Anycubic Kobra 3 prints slightly differently from the next printer, which is why holes come out tight and lids loose. Fit Check cuts a five-minute test slice from the interface that must fit, you report too tight, perfect or too loose, and every model after that is built with the clearance your Kobra 3 needs. The test slice downloads free as STL or 3MF. How Fit Check works.
The Kobra 3 against its rivals
Ready-made parts for the Kobra 3 in the library
Questions
Yes. The Anycubic Kobra 3 is one of the 380+ printers in the slicer catalog, with 4 nozzle variants and the print and filament profiles OrcaSlicer ships for it. Pick it in the download dialog and download G-code; it is saved to your account for next time.
No. SpeakCAD slices on its servers and gives you a .gcode file. Copy it to the SD card or USB stick the Kobra 3 takes, or upload it through the printer's own web page or app. If you prefer your own slicer, download the STL or 3MF instead.
The print profile (layer height and speed presets from the Anycubic Kobra 3's profile), the filament profile (the printer's own and the OrcaSlicer library: Generic PLA, PETG, ABS, ASA, TPU, carbon-fibre blends and hundreds of branded filaments), infill, wall count, supports and bed adhesion. Nozzle temperature, bed temperature and speeds come from the profiles you pick.
The virtual bed in the viewer is sized from the Anycubic Kobra 3's profile (255 x 255 mm), so you see it before slicing. Ask for the part to be split into two pieces with alignment pins or a dovetail, or for a different orientation; each is one sentence.
G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Re-slicing a design you already downloaded, with other settings, charges nothing. STL and 3MF downloads are always available.
Yes. Upload the STL or 3MF (up to 50 MB) to SpeakCAD's online slicer, pick the Anycubic Kobra 3, choose the layer height, filament, infill and supports, and download a .gcode file. It slices with the same OrcaSlicer profile as the editor's G-code download, in the browser on a computer, a Chromebook, an iPad or a phone. The online slicer is free with a free account (no card, no credits): up to 10 files a day, and re-slicing the same file with other settings within 24 hours does not count. Accounts on a paid plan slice up to 60 files a day.
Yes. The editor runs in Safari on iPhone and iPad and in Chrome on Android; the file lands in Files or Downloads, ready for the card or the printer's app. The same project opens later on a desktop.