A Gridfinity generator for bins shaped to what they hold
From the drawer and the tools to a bin on the bed
Measure the drawer for the footprint and the tools for the pockets; the base, the lip and the grid are standard and the AI keeps them so.Describe what goes in it
A slot per tool with its width in millimetres, a pocket shaped to an object, compartments by count, a finger scoop, a label tab on the front, magnet pockets (6 × 2 mm magnets) or none, a stacking lip or a flat rim.Check the render
The first render usually appears within a minute or two: a new part gets deeper reasoning through the geometry, and small edits land in seconds. Tap a face to read a slot's width against your tool, and change one number by chat or in the dimensions panel. A label or an extra hole is a hand tool on the face you tap.Download and print
STL or 3MF, or G-code sliced with the official OrcaSlicer profile of one of 380+ printers. The download of a bin with AI work in it is included in every plan (4 credits without one).What one bin costs
| Step | Cost |
|---|---|
| Live demo: 3 AI edits of a real part, no account | Free |
| Describing the bin and its contents (one AI request) | 4 credits on a plan, 3 credits without one |
| Each small change by chat | 2 credits; the first 3 of each part free on a plan |
| Each design change by chat | 3 credits |
| Each quick edit by chat (a changed size or number) | 1 credit |
| Typing a new number in the dimensions panel, undo | Free |
| STL or 3MF download | Included in every plan; 4 credits without one, small fixes after it re-downloading free |
| G-code sliced for your printer | The price of the STL or 3MF download |
| Maker | $7.99 a month: 50 credits a month, about 8 parts with a small change and a few quick edits each, downloads included; cancel anytime |
| Pro | $14.99 a month: 200 credits a month, downloads included |
| Unlimited | $79.99 a month: 300 AI requests a month and unlimited downloads |
Bin descriptions that render right the first time
Grid size, height in units, then each pocket in millimetres. Each opens in the editor with the text already typed; measure your own tools before printing.“A 2 × 3 Gridfinity bin, 6 units tall, with three slots along the long side 14, 18 and 24 mm wide, full depth, a label tab on the front and a finger scoop at the back, no magnet pockets.”
Open this prompt in the editor“A 1 × 1 Gridfinity bin, 3 units tall, with two SD card slots 33 × 2.6 mm, 20 mm deep, and six microSD slots 16 × 1.4 mm, 10 mm deep, magnet pockets in the base.”
Open this prompt in the editor“A 6 × 3 Gridfinity bin, 4 units tall, with a pocket for a 150 mm digital caliper 240 × 80 mm and 18 mm deep, a finger scoop at the display, and a flat rim without a stacking lip.”
Open this prompt in the editor“A 2 × 2 Gridfinity bin, 4 units tall, with an 8 × 8 grid of 4.3 mm hex pockets 12 mm deep on a 9 mm pitch for 4 mm precision bits.”
Open this prompt in the editorGridfinity generators compared
Read on each tool's own page on 17 November 2026. All of them make bins that seat in a standard baseplate; they differ in what you can put inside.
| Tool | Runs in | What you set | Output | Price |
|---|---|---|---|---|
| SpeakCAD | Browser on a phone, tablet or computer | Grid size and height, then any pocket, slot, scoop, label tab or magnets, described in millimetres | STL, 3MF, G-code sliced for 380+ printers | AI requests use credits; hand edits free |
| Gridfinity Generator (gridfinitygenerator.com) | Browser | Bins, baseplates, cutouts from an STL you import, collections on one grid | STL | Free; a subscription saves more models |
| Gridfinity Rebuilt (OpenSCAD) | OpenSCAD on a computer | Any bin size, compartments, lip, scoop, tabs, magnet holes, vase-mode bins, in code | What OpenSCAD exports | Free, MIT licence |
| GridfinityGenerator for Fusion | An add-in inside Autodesk Fusion | Simple bins and baseplates, hole placement | Fusion's exports | Free add-in; needs Fusion |
- For a standard bin or a baseplate, a template generator is quicker and free: pick the size, toggle the lip and the magnets, download.
- For a bin shaped around specific tools, describe it: a template has no field for "a slot for a Pinecil and its tips" or "a pocket for Knipex Cobra 180 and 125". Gridfinity Generator's cutout mode gets close if you already have an STL of the object.
- On a phone, SpeakCAD is the one that runs there end to end, from the description to the sliced file.
The Gridfinity numbers the AI keeps
- Grid: 42 mm. Bins are made 0.5 mm under their grid span (a 2 × 1 bin is 83.5 × 41.5 mm).
- Height: 7 mm units, base included: 3 units (21 mm) for small parts, 6 (42 mm) for tools standing up, 9 (63 mm) for tall things.
- The base: the stepped feet that seat in the baseplate, the same on every bin.
- Magnets: 6 × 2 mm, pressed into pockets in the corners of each cell, only useful on a plate with magnets.
- The stacking lip lets another bin sit on top; ask for a flat rim to grab the bin instead.
A custom Gridfinity bin sized to what it holds walks through choosing the footprint from the drawer and the slots from the tools. If you are choosing a system, Gridfinity vs IKEA Skådis vs French cleat compares them.
Ready-made bins and baseplates
The organizers library has Gridfinity bins for named tools, among them a 150 mm digital caliper, a Pinecil V2 soldering iron, Knipex Cobra 180 and 125 pliers, Wera Kraftform screwdrivers and 64 iFixit precision bits, and baseplates sized to the bed of a Bambu Lab A1 mini or an Ender 3. Each opens in a free account and resizes in the viewer.
Will it fit the plate?
The base is built to the standard profile, and the pockets get the clearance you ask for (0.3 to 0.5 mm per side for a tool that should lift out easily). SpeakCAD is the only AI 3D editor that calibrates itself to your printer: Fit Check cuts a five-minute test slice from the part that must fit, you report too tight, perfect or too loose, and every model after that is built with the clearance your printer needs. For a bin, print one cell of the base and one pocket first.
What it costs
A bin is an AI request. Start with Maker: 50 credits a month for $7.99, cancel anytime. Shaping a part by hand (a hole and its screw head, a cut, an added tab, raised or engraved text, an extruded face, rounded corners, and copies in a row, a grid or a circle), turning it around in 3D and changing its numbers in the viewer are free, and so is downloading a part you shaped by hand or a ready-made library model; an AI request spends credits for the work it takes, whichever model answers: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits (a big rework of a large model or a very long description takes the most, a web lookup of a product's real measurements counts as part of the work), and each answer shows what it spent; on a plan the first three small changes of each part spend nothing, and an account's very first part spends 2; an answer that changes nothing or only the part's numbers, a request that fails or whose program does not compile, and the first Redo of an answer that missed spend nothing; downloads are included in every plan, and without a plan a download of a part with AI work in it spends 4 credits (small fixes after a download re-download free); G-code sliced for your printer costs the same as the STL or 3MF.
Questions
For a standard bin or a baseplate, a free template generator: Gridfinity Generator in the browser, Gridfinity Rebuilt in OpenSCAD, or the GridfinityGenerator add-in in Fusion. For a bin shaped around specific tools, with a slot or a pocket per tool in millimetres, SpeakCAD: describe the bin and its contents and the AI builds it on the standard base, with an STL, a 3MF or G-code sliced for 380+ printers, on a phone or a computer.
Yes. The AI builds the bin on the standard Gridfinity base: 42 mm grid, bins 0.5 mm under their grid span, 7 mm height units, the stepped feet that seat in the plate, and the stacking lip unless you ask for a flat rim.
Yes. Ask for magnet pockets for 6 × 2 mm magnets in the base, one in each corner of each cell, or say no magnets for a plate without them.
Yes: describe it in cells ("a 5 × 4 Gridfinity baseplate, magnet pockets only"), or open one of the baseplates in the [library](/library/category/organizers) sized to a common print bed and resize it. A free template generator is just as good for a plain baseplate.
Yes. SpeakCAD runs in Safari on iPhone and iPad and in Chrome on Android: describe the bin, check the slots, and the STL, 3MF or G-code lands in Files or Downloads.
Describing the bin is one AI request (4 credits on a plan, 3 without one), its first 3 small changes free on a plan, then each small change by chat 2 credits (1 credit for a quick edit, a changed size or number), and the download is included in every plan (4 credits without one); typing a number in the viewer and adding a label or a hole with the hand tools spend nothing. A new free account also gets its first AI part free (not offered in every country): some accounts get the credits right away, others confirm with a card first (a free trial, nothing charged that day); downloading the part spends 4 credits without a plan, like any AI work (every plan includes downloads). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it.