1
Organizers & storage
Gridfinity bin for 64 iFixit 4 mm precision bits
This is not a fixed STL. SpeakCAD generates the gridfinity bin for 64 ifixit 4 mm precision bits to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a 2×2 Gridfinity bin, 4 units tall, 8×8 grid of 4.3 mm hex pockets 12 mm deep on a 9 mm pitch for 4 mm precision bits.
What a gridfinity bin for 64 ifixit 4 mm precision bits is
A 2 × 2 Gridfinity bin (83.5 × 83.5 mm, 4 units tall) holding 64 precision bits with the 4 mm hex shank used by iFixit Mako and Moray kits. The 8 × 8 grid of hex pockets is 4.3 mm across flats, 12 mm deep on a 9 mm pitch, and each 28 mm bit stands with its tip up. Print in PLA at 0.2 mm, bin base on the plate.
1/4 inch hex bits are 6.35 mm across and will not go in. Open the bin in SpeakCAD for free, change the grid in the viewer or the chat, then download the STL.
People also search
gridfinity ifixit bitsgridfinity precision bit holder4mm bit holder stlifixit mako bit organizer
Questions people ask about a gridfinity bin for 64 ifixit 4 mm precision bits
A 2 × 2 Gridfinity bin (83.5 × 83.5 mm, 4 units tall) holding 64 precision bits with the 4 mm hex shank used by iFixit Mako and Moray kits. The 8 × 8 grid of hex pockets is 4.3 mm across flats, 12 mm deep on a 9 mm pitch, and each 28 mm bit stands with its tip up. Print in PLA at 0.2 mm, bin base on the plate.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a 2×2 Gridfinity bin, 4 units tall, 8×8 grid of 4.3 mm hex pockets 12 mm deep on a 9 mm pitch for 4 mm precision bits.
1/4 inch hex bits are 6.35 mm across and will not go in. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
French cleat screwdriver rack, 12 slotsA 12-slot French cleat screwdriver rack in two rows.Stepped rack for craft paint bottlesA tiered display that holds 2 oz craft paint bottles and dropper bottles at an angle so labels face forward.KitchenAid attachment holder rack for pasta roller and grinderA rack that stores KitchenAid power hub attachments upright by their drive shafts so the pasta roller, fettuccine cutter and food grinder stop rattling loose…25 mm French-cleat safety-glasses binA 120 × 80 × 60 mm bin on a 25 mm French cleat that holds two pairs of safety glasses and a pack of earplugs.IKEA TROFAST label-holder clipA clip that hangs a 70 × 25 mm label on the front of a TROFAST bin so kids can find Lego without opening every drawer.Tesla Model Y Juniper cup holder coin insertA drop-in insert for one front cup holder of a 2025 Model Y Juniper that turns it into a coin, key and sunglasses-clip tray.