Easy CAD for 3D printing: the hand tools, and when to ask the AI

Tinkercad vs Fusion 360 in 2026: which to learn first for 3D printing

Tinkercad or Fusion 360 first? What each asks before a first printed part, what carries over, their free conditions in 2026, and a third route for parts only.
17 November 2026 · 7 min readtinkercadfusion 360beginners

Learn Tinkercad first if you have never used CAD and want something off the printer this week. Go straight to Fusion (formerly Fusion 360) if you already know you want CAD as a skill, for a job, a CNC machine or assemblies, and you have a Windows or Mac computer and a few weeks for a course. Both come from Autodesk, and they sit at the two ends of the scale: one teaches the idea of CAD in an afternoon, the other is the complete tool. There is also a third route, for when what you want is the part rather than the skill.

We make SpeakCAD, that third route. The facts about Tinkercad and Fusion come from Autodesk's own pages, checked on 17 November 2026; the sources are at the end, and where one of the two is the better pick, this post says so.

The short answer

  • Never used CAD, first print this week: Tinkercad. Free in full, in a browser, with lessons built in.
  • A child or a classroom: Tinkercad. It was built for teaching.
  • CAD as a skill, for a job or a degree: Fusion. Skip the detour and follow a course.
  • CNC, assemblies, STEP for a machinist: Fusion. Tinkercad has none of them.
  • Functional parts that must fit, and no wish to study CAD: SpeakCAD. You tap a face and type the millimetres, or describe the part.

Side by side

TinkercadFusion
What it isA free web app for building with shapesProfessional parametric CAD with CAM
PriceFree in fullFree for personal, non-commercial use; otherwise $680 a year
Conditions of the free offerNoneUnder $1,000 a year in revenue, 10 active documents, forum support
Runs onA browser on any computer, Chromebooks included; an iPad appWindows and macOS, installed
On a phoneNot supported: the editor needs a window 864 px wideA viewer
You start fromAn empty workplane and a panel of shapesAn empty design and its sketch planes
Before a first printed partDrag shapes, make some holes, align, groupSketch, dimension, constrain, extrude, then features
SizesTyped on each shape, not linkedParametric: change a dimension and the model follows
Rounded edgesNo fillet toolFillets and chamfers on the edges you pick
Files outSTL, OBJ, GLTF, SVGSTEP, STL, OBJ and more
Time to feel at homeAn afternoonWeeks to months

What Tinkercad asks before a first printed part

Almost nothing, which is the point. You drag a box onto the workplane and type its length, width and height. You drag a cylinder, mark it as a hole, move it to where the screw goes, select both and group them: the cylinder is cut out of the box. Export the STL, slice it, print it.

That is three ideas, all of them true of every CAD you will ever use: a part is made of simple solids, a hole is a solid taken away, and sizes are numbers. A child gets there in one lesson, and Tinkercad has those lessons built in.

Look elsewhere if the part has to fit something. A size belongs to one shape and knows nothing about the others, so making the plate 20 mm longer leaves the holes where they were, and there is no fillet tool: a rounded edge is built from other shapes. For a nameplate or a simple box none of that matters. For a bracket that has to line up with two screws in a wall, it is where people start looking for the next tool.

What Fusion asks before a first printed part

A different way of thinking. In Fusion you do not move solids around: you draw a flat sketch on a plane, give it dimensions, add constraints so it cannot drift, and extrude it into a body. A hole is a feature placed by a dimensioned point. Everything you do is recorded in a timeline, and editing an early step replays the later ones.

That is six ideas before the first part (sketch planes, dimensions, constraints, features, bodies, the timeline), and it is why beginners find Fusion hard; the glossary explains each word. It is also why the result is so much stronger: lengthen the plate and the holes follow, because they were defined from its edges. Round the edges you pick, export a STEP file, cut the same part on a CNC mill.

Look elsewhere if you have no Windows or Mac computer, or you sell what you make. Fusion installs on Windows or macOS; Autodesk's browser version is reserved for commercial and education licences, so the free personal licence needs that computer. And the personal licence is for non-commercial projects by individuals generating less than $1,000 a year, with 10 active documents at a time.

What carries over from Tinkercad to Fusion

The foundation carries over: thinking in millimetres, building by adding and taking away, checking a part from every side before printing, exporting and slicing. What does not carry over is the method. Nothing in Tinkercad resembles a constrained sketch or a timeline, so the first Fusion lesson starts from zero either way.

So Tinkercad first is a good plan when you are not sure CAD is for you: an afternoon tells you. It is a detour when you already know you want Fusion, and those hours are better spent on a Fusion course from the first day.

The third route: the part, not the skill

If you do not want to learn CAD, only to have a bracket, a case or a spacer with the holes in the right place, SpeakCAD is made for that case. It keeps what makes Tinkercad approachable (you start from a solid, not a sketch) and adds what sends people to Fusion (typed positions, rounded edges, sizes in millimetres on everything). A new model opens on a box, a plate, a cylinder or a tray with its sizes; you tap the face where the feature goes, pick a tool and type the numbers, on a phone or a computer. Counted on the editor: an M4 hole 6 mm from two edges of a plate, 4 taps and 2 typed numbers; the same hole moved 10 mm, 1 tap and 1 typed number; an open box with 8 mm rounded corners, 2 taps and 1 typed number on a computer (3 taps on a phone).

The hole presets are clearance sizes (M3 is 3.4 mm), so the screw goes through on the first print. When the tools do not do it, such as a snap clip or a thread, you describe the change to the AI. The file leaves as an STL, a 3MF or G-code sliced for one of 380+ printers.

Look elsewhere if you want CAD as a skill. SpeakCAD has no sketches with constraints, no assemblies and no STEP export, so it teaches the ideas (typed sizes, features on a face, positions from edges) but not the method a Fusion course teaches. And for a young child's first lesson in shapes, Tinkercad is the gentler start. CAD for beginners lays out a first week of parts; SpeakCAD vs Tinkercad and SpeakCAD vs Fusion 360 are the full comparisons.

Which to learn first, by case

  1. You are a child, or you teach children. Tinkercad.
  2. You bought a printer and want to see whether designing is for you. Tinkercad for an afternoon, or SpeakCAD if the first thing you need is a part that fits.
  3. You are heading for engineering, product design or a workshop with a CNC. Fusion, with a course.
  4. You need five parts for the house this month and no new hobby. SpeakCAD.
  5. You outgrew Tinkercad on a part that must fit. Fusion if you want the skill, SpeakCAD if you want the part.

The best Fusion 360 alternatives covers the other options, Onshape and FreeCAD among them, and the best CAD for beginners sorts eight programs by what you want to make.

Sources

Read on 17 November 2026:

Shaping a part by hand (a hole, a cut, an added shape, text, rounded corners, a shell, every size typed in millimetres) is free, and so is downloading what you shaped. With the AI, a request spends credits for the work it takes: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits; on a plan the first 3 small changes of each part are free; without a plan a new part spends 3. Start with Maker: 50 credits a month for $7.99, cancel anytime.

Prompts to start from

Open one in the builder, change the numbers to yours, and the model renders in your browser, usually within a minute or two. Keep adjusting in the chat before you print.

A plate 90 x 60 x 3 mm with four M4 holes 6 mm from each corner and 5 mm rounded corners

Open in the builderPre-filled after sign-in. Try it in the live demo first, no account needed.

A wall hook 20 mm wide that sticks out 45 mm, with two countersunk holes for 4 mm screws 32 mm apart

Open in the builderPre-filled after sign-in. Try it in the live demo first, no account needed.

A box 100 x 70 x 40 mm outside with 2 mm walls and a lid that presses on with 0.2 mm clearance

Open in the builderPre-filled after sign-in. Try it in the live demo first, no account needed.

Questions

Tinkercad first if you have never used CAD or are not sure it is for you: it is free in full, runs in a browser and teaches the idea in an afternoon. Fusion first if you already know you want CAD as a skill, for a job, CNC or assemblies: Tinkercad's drag-and-group method does not carry over to Fusion's sketches and timeline, so start the Fusion course directly. If you only want parts for your printer, SpeakCAD gets you a dimensioned part without either.

For simple shapes, yes: nameplates, basic boxes, first prints. It exports STL and is free in full. It runs short when a part has to fit something: there is no fillet tool, and sizes are typed on each shape and not linked, so changing one size means moving the holes by hand.

Yes, through Fusion for personal use, with conditions set by Autodesk: personal, non-commercial projects, less than $1,000 a year in revenue, 10 active editable documents at a time and forum support. It exports STL and STEP. It installs on Windows or macOS; the browser version is for commercial and education licences only.

Tinkercad works in the browser on a Chromebook and has an iPad app; its editor needs a window at least 864 pixels wide, so phones are not supported. Fusion installs on Windows and macOS, its phone app is a viewer, and its browser version is limited to commercial and verified education licences. SpeakCAD runs in a browser on a phone, a Chromebook or a computer.

For functional printed parts, SpeakCAD: you start from a solid as in Tinkercad, but every size and position is a typed millimetre value, corners and edges can be rounded, and an M4 hole 6 mm from two edges of a plate takes 4 taps and 2 typed numbers. For full parametric CAD in a browser, Onshape, with a learning curve close to Fusion's.

Shape it by hand, free

Open a box or a plate, tap where the hole goes, type the size and download the STL with a free account; the AI is there when you would rather describe the part, at 4 credits a part on a plan, its first 3 small changes free.