The best Fusion 360 alternatives in 2026 for 3D printing, by what you need
Six Fusion 360 alternatives for 3D printing in 2026, by need: Onshape, FreeCAD, Shapr3D, Tinkercad, OpenSCAD, SpeakCAD, and where Fusion stays the right tool.The best alternative to Fusion (formerly Fusion 360) depends on what sent you looking. If it is the conditions on the free personal licence, Onshape and FreeCAD are the two free routes to the same kind of CAD. If it is the install, Onshape runs in a browser. If it is the learning curve, and all you need is a part off your printer, SpeakCAD or Tinkercad gets you there without sketches and constraints. And if you need CAM, simulation or assemblies, Fusion is still the right tool.
We make SpeakCAD, one of the six alternatives below. The facts about the others come from their own pages, checked on 17 November 2026; the sources are at the end, and where we are not the right pick, the list says so.
The short answer
- Real CAD with nothing to install: Onshape. Free for non-commercial use, with every document public.
- Real CAD with no conditions: FreeCAD. Free and open source, on a desktop, with the steepest interface of the six.
- Drawing with a pencil on an iPad: Shapr3D. A small free tier; STEP needs the paid plan.
- A first lesson, a child or a classroom: Tinkercad. Free in full.
- A part written as a short program: OpenSCAD. For people who code.
- Only the printed part, with real dimensions: SpeakCAD. Tap a face and type the millimetres, or describe it to the AI.
- CAM, simulation, assemblies, STEP for a machinist: stay with Fusion.
Why people look for an alternative
The personal licence has conditions. Fusion for personal use is free, within limits set on Autodesk's own pages: personal, non-commercial projects, for individuals generating less than $1,000 a year, and not for a job, a company or paid training. You get 10 active (editable) documents at a time, forum support, and no simulation, generative design or cloud rendering. It runs on a one-year term that renews. Past those limits the answer is a subscription: $680 a year or $85 a month.
It is a desktop install. Fusion installs on Windows and macOS, with a minimum of 8 GB of memory and 8.5 GB of storage. A browser version exists, but Autodesk reserves it for commercial and verified education licences: personal licences do not have it. The phone app is a viewer.
The learning curve is real. Sketch planes, dimensions, constraints and features come before a first part, then the timeline and components. That is a lot when the goal was a bracket. Is Fusion 360 hard to learn? goes through each step.
Side by side
| Tool | Pick it when | Runs on | Free offer | Files out |
|---|---|---|---|---|
| Fusion | You need CAM, simulation or assemblies | Windows and macOS; a browser version for commercial and education licences | Personal use: non-commercial, under $1,000 a year, 10 active documents | STEP, STL, OBJ and more |
| Onshape | You want real CAD with no install | Browser; iOS and Android apps | Free plan: non-commercial, every document public | STEP, STL, 3MF, Parasolid |
| FreeCAD | You want real CAD with no conditions | Windows, macOS, Linux | Entirely free, open source | STEP, IGES, STL, OBJ, DXF |
| Shapr3D | You draw, on an iPad | iPad, Mac, Windows, Vision Pro; a viewer on most iPhones | Basic: 2 projects, basic-resolution STL and 3MF | STEP and high-resolution meshes on the paid plan |
| Tinkercad | You want a first lesson | Browser on a computer; an iPad app | Free in full | STL, OBJ, GLTF, SVG |
| OpenSCAD | You code | Windows, macOS, Linux | Free, open source | STL, 3MF, AMF, OFF |
| SpeakCAD | You only need the printed part | Browser on a phone, tablet or computer | The hand tools and their STL or 3MF; the AI from Maker $7.99 a month | STL, 3MF, G-code for 380+ printers; no STEP |
Onshape: real CAD in a browser
Onshape is professional parametric CAD in a browser tab: sketches with constraints, fillets on the edges you pick, assemblies, STEP. Its free plan has that modeller, on two conditions stated on its pricing page: non-commercial use only, and every document open to the public. Private documents start with the Standard plan, at $1,500 per user a year.
Look elsewhere if your designs must stay private, or if the learning curve was your reason for leaving: Onshape's first part is also a sketch on a plane. SpeakCAD vs Onshape.
FreeCAD: real CAD with no conditions
FreeCAD is an open-source parametric modeller for Windows, macOS and Linux: no licensing fees, no account, no document limit, files on your own disk, STEP in and out. The 1.x releases fixed the old problem of an edit breaking the features built on it. The cost is the interface, split into workbenches that take time to learn.
Look elsewhere if you want a part this week, or anything on a phone or a Chromebook. SpeakCAD vs FreeCAD.
Shapr3D: draw it on an iPad
Shapr3D is direct modelling built around the iPad and its pencil, also on Mac and Windows: you sketch, then push and pull, with no timeline to manage. The free Basic plan keeps 2 projects and exports STL and 3MF at basic resolution; STEP comes with Pro, at $299 per editor a year.
Look elsewhere if you have none of those devices: there is no web editor, and on most iPhones the app is a viewer. SpeakCAD vs Shapr3D.
Tinkercad: the gentle first lesson
Also from Autodesk, at the opposite end of the scale: you drag boxes and cylinders onto a workplane, turn some into holes, group them and export. It is free in full and runs in a browser on any computer.
Look elsewhere if the part has to fit something: there is no fillet tool, sizes are typed on each shape and not linked, and phones are not supported. A Tinkercad alternative covers what people move to.
OpenSCAD: the part as a program
OpenSCAD is not an interactive modeller. You write a script (a cube, minus a cylinder, moved 6 mm) and it compiles the solid; change a number and the part rebuilds. It is free, open source and exact.
Look elsewhere if you do not code. SpeakCAD's AI writes OpenSCAD for you: SpeakCAD vs OpenSCAD.
SpeakCAD: when you only need the printed part
SpeakCAD is not a general CAD. It is a CAD for functional printed parts: a new model starts from a box, a plate, a cylinder or a tray with its sizes, you tap the face where a hole or a cut goes, pick one of the nine hand tools (Hole, Cut, Add, Extrude, Text, Round, Fillet, Shell and Measure) and type the millimetres. Hole presets are clearance sizes, so an M3 hole is 3.4 mm and the screw goes through. What the tools do not do (a snap clip, a hinge, a thread), you describe to the AI. The file leaves as an STL, a 3MF or G-code sliced for your printer.
Look elsewhere if you need sketches with constraints, assemblies, STEP files or organic shapes: it has none of them. SpeakCAD vs Fusion 360 is the full comparison.
Where Fusion stays the right tool
- CAM. Toolpaths for a CNC mill or a lathe from the same model; the personal licence includes 2.5-axis and 3-axis milling and turning.
- Simulation. Testing a part under load before making it, on a paid subscription.
- Assemblies. Several parts with joints, moving together.
- STEP for a machinist. An exact solid rather than a mesh, which the personal licence still exports.
If two of those are on your list, the learning curve is the price of the right tool. The closest in scope are Onshape and FreeCAD: Fusion vs Onshape vs FreeCAD compares the three free offers line by line.
How we picked
- Does it answer the reason you are leaving? The licence, the install or the learning curve.
- Where does it run? A browser, a desktop, an iPad, a phone.
- What does its free offer ask in return? Public documents, non-commercial use, a project limit, or nothing.
- What file comes out? A mesh is enough for a slicer; a machinist needs STEP.
Sources
Read on 17 November 2026:
- Autodesk: Fusion for personal use, what the personal licence includes, system requirements, browser access to Fusion FAQ
- Onshape: plans and pricing
- FreeCAD: freecad.org, downloads
- Shapr3D: pricing, Shapr3D on iPhone
- Tinkercad: technical requirements
- OpenSCAD: about OpenSCAD
- Feature and export lists not on those pages follow the side-by-side pages linked above, checked on 4 October 2026.
Shaping a part by hand (a hole, a cut, an added shape, text, rounded corners, a shell, every size typed in millimetres) is free, and so is downloading what you shaped. With the AI, a request spends credits for the work it takes: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits; on a plan the first 3 small changes of each part are free; without a plan a new part spends 3. Start with Maker: 50 credits a month for $7.99, cancel anytime.
Prompts to start from
Open one in the builder, change the numbers to yours, and the model renders in your browser, usually within a minute or two. Keep adjusting in the chat before you print.A wall bracket for a 28 mm pipe: a 60 x 40 mm back plate 4 mm thick with two M4 countersunk holes 40 mm apart and a half-round cradle 20 mm deep
An enclosure 70 x 45 x 28 mm outside with 2 mm walls, a 9 mm cable hole in one short side and a lid that slides on with 0.3 mm clearance
A knob 30 mm across and 15 mm tall with a 6.2 mm hole 10 mm deep for a 6 mm shaft and a flat on one side of the hole
Questions
It depends on why you are leaving. For the same kind of parametric CAD with nothing to install, Onshape, whose free plan is non-commercial with public documents. For no conditions at all, FreeCAD, free and open source on Windows, macOS and Linux. For drawing on an iPad, Shapr3D. For a first lesson, Tinkercad. If you only need a functional printed part with real dimensions, SpeakCAD: tap a face and type the millimetres, or describe it to the AI, on a phone or a computer.
Yes, with conditions. Autodesk's personal-use pages, read on 17 November 2026, limit it to personal, non-commercial projects by individuals generating less than $1,000 a year, with 10 active editable documents at a time, forum support and limited file types. Simulation, generative design and cloud rendering are not included. The full subscription is $680 a year or $85 a month.
Onshape is the closest: full parametric CAD in a browser tab, free for non-commercial use with public documents. Tinkercad runs in a browser for simple shapes, and SpeakCAD for functional printed parts, on a phone too. Fusion has a browser version of its own, but Autodesk limits it to commercial and verified education licences; personal licences do not have it.
Onshape and FreeCAD export STEP on their free offers, and Shapr3D on its paid plan. Tinkercad, OpenSCAD and SpeakCAD export meshes such as STL, which is what a printer's software needs but not what a machinist asks for. Fusion's personal licence itself still exports STEP.
For a first lesson in shapes on a computer, Tinkercad: free in full, with lessons built in. For functional printed parts with real dimensions, SpeakCAD is the easiest way to start CAD for 3D printing: you begin from a shape that already has its sizes, tap a face and type the millimetres. Neither replaces Fusion for assemblies, CNC or STEP files.