Easy CAD for 3D printing: the hand tools, and when to ask the AI

What makes a CAD easy to use? Seven tests a beginner can run on any CAD in ten minutes

Easy is measurable: where a CAD starts you, how a hole gets placed, what survives a change, whether it knows printing. Seven tests to run on any CAD.
12 November 2026 · 5 min readcadbeginnersintuitive

Every CAD calls itself easy. The word means nothing until you test it, and a beginner can test it: open the program, try one small real part, and watch what it asks of you. Here are seven tests, each with what a good answer looks like and the answer we measured on SpeakCAD's editor. Run them on any CAD you are considering, including ours.

1. Where does it start you?

Open a new model and look. An empty plane with a sketch tool means your first job is to draw and constrain before anything exists. A panel of shapes means dragging and arranging. A part that already exists, with its sizes, means your first job is the part.

Good answer: something printable within the first minute. SpeakCAD opens a new model on four starters (Open box, Plate, Cylinder, Tray) with their sizes in millimetres, or your own STL, or a sentence for the AI.

2. Can you put a hole exactly where the drawing says?

The test every printed part takes: an M4 through hole whose centre is 6 mm from the left edge and 6 mm from the front edge of a plate. Count the clicks or taps, and the numbers you type. Watch for steps where you drag by eye, or measure separately, or group things afterwards.

Good answer: a handful of steps, every distance typed. On SpeakCAD, 4 taps and 2 typed numbers: Hole, tap the top face near that corner, M4, type 6 and 6, Apply hole. Through is already on, and the two Position rows already measure from the nearest edges.

3. What happens when you change a number?

Make the plate 20 mm longer. Does the hole stay 6 mm from its edge, or does it end up somewhere in the middle? Does anything else break?

Good answer: features keep their relation to the face they were placed on, and nothing fails silently. Tinkercad's sizes are fields on each shape and are not linked, so the hole stays where it was; a professional CAD keeps the relation if the sketch was constrained.

4. Can you fix a feature after you placed it?

Move the hole 10 mm. Make it 5 mm instead of 4.5. Remove it. Then undo.

Good answer: tap the feature, retype its number. On SpeakCAD, moving the hole 10 mm is 1 tap and 1 typed number; every hand edit is a numbered version you can undo.

5. Does it know about printing?

Ask for a hole for an M3 screw. A CAD that does not know printing makes it 3 mm, and the screw does not go through: printed holes come out 0.2 to 0.4 mm small. Look at the defaults for walls and clearances too.

Good answer: clearance sizes as presets (M3 is 3.4 mm), walls that suit a 0.4 mm nozzle, and a way to test a fit before a long print. SpeakCAD's Hole presets go from M2 to M8, a tap toggle drops them to the sizes a screw cuts its own thread into, and Fit Check prints a five-minute slice of the part that must fit.

6. Does it run on the device you actually have?

Try it on the phone in your pocket, the school Chromebook, the iPad. Not "is there an app", but can you finish the hole test on it.

Good answer: the whole editor, on every device you own. SpeakCAD runs in the browser on a phone, a tablet or a computer with nothing to install. Tinkercad needs a window at least 864 pixels wide; Fusion's phone app is a viewer.

7. What happens when you are stuck?

Try something the tools do not obviously do, like a snap-fit clip, and see where the program sends you: a tutorial, a forum, nothing?

Good answer: help about your part, where you are. In SpeakCAD, the last item of the tool rail is AI: point at the spot on the model and say what to change; a small change spends 2 credits, and on a plan each part's first 3 small changes spend nothing.

The scorecard

TestSpeakCAD (measured)TinkercadOnshape
1. Where it startsA starter with its sizes, an STL, or a sentenceAn empty workplane and shapesAn empty Part Studio and three planes
2. Hole 6 mm from two edges4 taps and 2 typed numbersDrag a hole shape, measure to each edge, groupA sketch point dimensioned to both edges, then Hole
3. Change a sizeFeatures keep their distances from the face's edgesSizes not linked between shapesKept, if the sketch was constrained
4. Fix a placed featureTap it, retype; 1 tap and 1 typed number to move it 10 mmArrow keys on the 1 mm grid, inside the groupEdit the sketch dimension, or Move face
5. Knows printingClearance presets, Fit CheckYou size holes yourselfYou size holes yourself
6. On a phoneFull editor in the browserUnsupportedApps, reviewed as hard on a phone
7. When stuckAI on the spot you point atLessonsLearning Center, AI Advisor for questions

Tinkercad's and Onshape's cells follow their own help pages, linked from intuitive CAD, where five tasks are counted side by side.

What the tests do not measure

Ease is not capability. Onshape and Fusion fail test 1 on purpose: a sketch-first CAD can build things a starter-first CAD cannot, such as assemblies, constrained sketches and STEP files. If you need those, take the learning curve. If you need parts for your printer, these seven tests tell you which program gets you there with the least to learn, and on them, SpeakCAD is the most intuitive CAD for 3D printing. The best CAD for beginners list sorts eight programs by what you want to make.

Shaping a part by hand (a hole, a cut, an added shape, text, rounded corners, a shell, every size typed in millimetres) is free, and so is downloading what you shaped. With the AI, a request spends credits for the work it takes: a quick edit usually 1–2, a small change 1–2, a new part or a design change 3–8, never more than 15 credits; on a plan the first 3 small changes of each part are free; without a plan a new part spends 3. Start with Maker: 50 credits a month for $7.99, cancel anytime.

Prompts to start from

Open one in the builder, change the numbers to yours, and the model renders in your browser, usually within a minute or two. Keep adjusting in the chat before you print.

An 80 x 50 x 3 mm plate with an M4 through hole 6 mm from the left edge and 6 mm from the front edge

Open in the builderPre-filled after sign-in. Try it in the live demo first, no account needed.

A snap-fit clip that holds a 12 mm tube against a wall, fixed with one M4 screw

Open in the builderPre-filled after sign-in. Try it in the live demo first, no account needed.

Questions

Seven things a beginner can test in ten minutes: it starts you from something printable, it places a hole at typed distances from edges in a few steps, features keep their place when a size changes, a placed feature can be retyped or moved, it knows printing (clearance hole sizes, walls), it runs on the device you have, and it helps you where you are stuck.

SpeakCAD, measured in taps: an M4 hole 6 mm from two edges of a plate is 4 taps and 2 typed numbers, the same hole moved 10 mm 1 tap and 1 typed number, on a phone or a computer. Tinkercad is the gentler first lesson in CAD on a computer; Onshape and Fusion are more capable and take longer to learn.

Try the same small real part in each: an 80 x 50 x 3 mm plate with an M4 hole 6 mm from two edges. Count the steps and typed numbers, then lengthen the plate and see whether the hole keeps its distance, then move the hole. The program that does all three with the least to learn is the easiest for you.

Shape it by hand, free

Open a box or a plate, tap where the hole goes, type the size and download the STL with a free account; the AI is there when you would rather describe the part, at 4 credits a part on a plan, its first 3 small changes free.