1
Kitchen & home
Xiaomi LYWSD03MMC thermometer wall frame
This is not a fixed STL. SpeakCAD generates the xiaomi lywsd03mmc thermometer wall frame to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an LYWSD03MMC wall frame, 43.6×43.6×13 mm pocket with 0.3 mm snap lip, open LCD face, 3 mm air gap, 4 mm keyhole.
What a xiaomi lywsd03mmc thermometer wall frame is
A wall frame for the Xiaomi Mi Temperature and Humidity Monitor 2 (LYWSD03MMC, 43 × 43 × 12.5 mm), popular with ATC firmware and Home Assistant BLE. The pocket is 43.6 × 43.6 × 13 mm with a 0.3 mm snap lip, the LCD stays fully visible, and the back has a 4 mm keyhole plus a 3 mm air gap. Print in PLA, 1.6 mm walls.
The round LYWSD02 clock is a different device. Open the model in SpeakCAD without paying, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
lywsd03mmc mount stlxiaomi thermometer holder 3d printlywsd03mmc wall framemi temperature humidity monitor 2 mount 3d model
Questions people ask about a xiaomi lywsd03mmc thermometer wall frame
A wall frame for the Xiaomi Mi Temperature and Humidity Monitor 2 (LYWSD03MMC, 43 × 43 × 12.5 mm), popular with ATC firmware and Home Assistant BLE. The pocket is 43.6 × 43.6 × 13 mm with a 0.3 mm snap lip, the LCD stays fully visible, and the back has a 4 mm keyhole plus a 3 mm air gap. Print in PLA, 1.6 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an LYWSD03MMC wall frame, 43.6×43.6×13 mm pocket with 0.3 mm snap lip, open LCD face, 3 mm air gap, 4 mm keyhole.
The round LYWSD02 clock is a different device. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More kitchen & home
Tea bag dispenser box with front slotA countertop box that holds a stack of wrapped tea bags and dispenses one at a time from a slot at the bottom.Weighted napkin holder with hinged barA tabletop holder that keeps a stack of napkins tidy on a patio.KitchenAid stand mixer bowl cover lid with pour chuteA splash lid for the 4.8 litre bowl of a KitchenAid Artisan tilt-head mixer that clips onto the rim and lets you add flour through a chute while the beater r…Fellow Stagg EKG drip-tray gridA 90 × 70 × 6 mm grid that sits on a Stagg EKG base and lets drips fall through 4 mm slots instead of staining the metal.Dyson Airwrap Complete Long standA counter stand that holds a Dyson Airwrap Complete Long (about 41 mm handle, 270 mm long) barrel-up so the cord does not yank it over.Vitamix Explorian E310 blade-cover standA stand that holds an E310 container (about 180 mm across the blade) upside down with a 40 mm blade clearance so the jar dries without dulling the blade on t…