1
Replacement parts
Voron 2.4 panel clip for 3 mm panels
This is not a fixed STL. SpeakCAD generates the voron 2.4 panel clip for 3 mm panels to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a panel clip for a Voron 2020 frame, 3.2 mm panel step 8 mm deep, M3 screw hole, 20×12×8 mm.
What a voron 2.4 panel clip for 3 mm panels is
A panel clip that holds the 3 mm side, rear and top panels of a Voron 2.4 against the 2020 frame, for replacing broken clips or re-panelling a build. It snaps into the 6 mm extrusion slot or uses an M3 screw and T-nut, grips the panel with a 3.2 mm step 8 mm deep, and is 20 × 12 × 8 mm. Print in ASA or ABS, since the chamber runs hot, on its side.
Builds with 1.5 mm foam tape under the panels need a 4.7 mm step instead. Open the clip in SpeakCAD for free, change the panel step in the viewer or the chat, then download the STL.
People also search
voron panel clip stlvoron 2.4 panel clipvoron panel clips 3mmvoron panel clip 3d print
Questions people ask about a voron 2.4 panel clip for 3 mm panels
A panel clip that holds the 3 mm side, rear and top panels of a Voron 2.4 against the 2020 frame, for replacing broken clips or re-panelling a build. It snaps into the 6 mm extrusion slot or uses an M3 screw and T-nut, grips the panel with a 3.2 mm step 8 mm deep, and is 20 × 12 × 8 mm. Print in ASA or ABS, since the chamber runs hot, on its side.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a panel clip for a Voron 2020 frame, 3.2 mm panel step 8 mm deep, M3 screw hole, 20×12×8 mm.
Builds with 1.5 mm foam tape under the panels need a 4.7 mm step instead. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Yeti Rambler MagSlider lid slider replacementThe magnetic slider on a Yeti Rambler 20 oz or 30 oz tumbler lid is the part that goes through the dishwasher, gets lost, and costs almost as much as a new lid.Nanoleaf Shapes 10 mm corner spacerA 10 mm spacer that sits behind a Shapes panel so a corner that is out of plane still clicks.IKEA SMÅSTAD bin-lid soft bumpA bump that sits under a SMÅSTAD bench-bin lid so it does not slam on little fingers.Anycubic Kobra S1 riser feetRiser feet that lift a Kobra S1 25 mm so its bottom vents breathe and the ACE Pro cable can run under it.Samsung washing machine softener siphon capA replacement siphon cap for the fabric softener compartment of Samsung front-loader detergent drawers, the small cap that goes missing and makes softener po…Bosch Purion display rain coverA snap-on cover for a Bosch Purion e-bike display that keeps rain and parking-lot knocks off the screen and buttons.