1
Brackets & mounts
Viofo A229 Pro windshield angle wedge
This is not a fixed STL. SpeakCAD generates the viofo a229 pro windshield angle wedge to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a Viofo A229 dashcam windshield wedge, 58×30 mm pad face, 10 degree angle, 1 mm alignment lip, flat back for VHB tape, ASA.
What a viofo a229 pro windshield angle wedge is
A wedge that goes between the windshield and the adhesive mount of a Viofo A229 Pro or A229 Plus, for steeply raked windshields where the camera ends up looking at the sky. The wedge is sized for a mount pad of about 58 × 30 mm, with a 10 degree default angle, a 1 mm lip to align the pad and a flat face for a fresh 3M VHB pad. Print flat in ASA or PETG, never PLA, because windshields get very hot.
The A119 Mini 2 uses a different mount, so check the pad size first. Open the ready-made wedge in SpeakCAD for free, change the angle or any millimetre in the viewer or the chat, then download the STL.
People also search
viofo a229 wedgeviofo a229 pro mount angledashcam windshield wedge stlviofo mount spacer 3d print
Questions people ask about a viofo a229 pro windshield angle wedge
A wedge that goes between the windshield and the adhesive mount of a Viofo A229 Pro or A229 Plus, for steeply raked windshields where the camera ends up looking at the sky. The wedge is sized for a mount pad of about 58 × 30 mm, with a 10 degree default angle, a 1 mm lip to align the pad and a flat face for a fresh 3M VHB pad. Print flat in ASA or PETG, never PLA, because windshields get very hot.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a Viofo A229 dashcam windshield wedge, 58×30 mm pad face, 10 degree angle, 1 mm alignment lip, flat back for VHB tape, ASA.
The A119 Mini 2 uses a different mount, so check the pad size first. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Wahoo ELEMNT ROAM v2 out-front mount for 31.8 mm barsAn out-front mount for 31.8 mm handlebars that holds a Wahoo ELEMNT ROAM v2 ahead of the stem on Wahoo's wedge interface.DIN rail clip for mounting a small PCBA snap-on clip for standard 35 mm top-hat DIN rail with a flat platform for a small circuit board.Google Nest Mini wall hanger with hidden cableA hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker.Sony WH-1000XM5 headphone wall hook with cable slotA slim wall hook designed around the narrow headband of the Sony WH-1000XM5, which is only about 25 mm wide at the top and slides off a chunky gaming-headset…Philips Hue Bloom under-shelf clipA clip that hides a Hue Bloom (about 120 mm diameter, 90 mm tall) under a 12–24 mm shelf so uplight hits the wall, not the table.GL.iNet Mango router wall mountA small wall mount for a GL.iNet Mango (GL-MT300N-V2, 58 × 58 × 25 mm) so it can sit behind a TV or next to a smart plug as a mini access point.