1
Replacement parts
Vertical blind 89 mm vane hanger
This is not a fixed STL. SpeakCAD generates the vertical blind 89 mm vane hanger to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a vertical blind vane hanger, 89 mm wide, vane slot, carrier hook, PETG.
What a vertical blind 89 mm vane hanger is
A replacement hanger for vertical blinds with 89 mm (3.5 inch) fabric vanes, the clip at the top of each vane that hooks onto the carrier in the headrail. It has an 89 mm wide body with a 1 mm slot for the vane stiffener, a hole for the vane, and a 4 mm hook for the carrier stem. Print flat in PETG, several at once.
127 mm vanes need a wider hanger and some headrails use a different stem. Open the ready-made hanger free in SpeakCAD, change the width or hook in the viewer or the chat, then download the STL.
People also search
vertical blind hanger 89mmvertical blind clip replacementvertical blind hanger 3d printvertical blind vane stl
Questions people ask about a vertical blind 89 mm vane hanger
A replacement hanger for vertical blinds with 89 mm (3.5 inch) fabric vanes, the clip at the top of each vane that hooks onto the carrier in the headrail. It has an 89 mm wide body with a 1 mm slot for the vane stiffener, a hole for the vane, and a 4 mm hook for the carrier stem. Print flat in PETG, several at once.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a vertical blind vane hanger, 89 mm wide, vane slot, carrier hook, PETG.
127 mm vanes need a wider hanger and some headrails use a different stem. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More replacement parts
Sliding wardrobe door roller carriageSliding wardrobe doors ride on small roller carriages that split along the axle after years of use, making the door drop and scrape.IKEA Hemnes drawer knob replacement with M4 screwA replacement knob for IKEA Hemnes and Malm drawers that reproduces the round 25 mm shape when one cracks or goes missing from a second-hand dresser.IKEA MALM drawer soft-close bumperA bumper that sits on a MALM drawer runner so the 80 or 160 cm drawer does not slam into the carcass.Bambu Lab X1 Carbon lid riser corner spacersFour corner spacers that raise the glass top of an X1 Carbon (389 × 389 × 457 mm) by 20 mm, letting warm air out when printing PLA or PETG so the chamber doe…Bosch dishwasher folding tine clipA clip that holds a folding tine row of a Bosch or Siemens dishwasher basket in the up position, the part that snaps off after years of hot cycles.De'Longhi Magnifica drip tray floatA replacement float for the drip tray of De'Longhi Magnifica S and other ECAM bean-to-cup machines, the red indicator that pops up when the tray is full.