1
Hobby & gaming
Universal controller wall rack for six pads
This is not a fixed STL. SpeakCAD generates the universal controller wall rack for six pads to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a wall rack for six controllers, 520×200×5 mm plate, two rows of three 34 mm arms 50 mm deep with 6 mm lips, 165 mm apart.
What a universal controller wall rack for six pads is
A wall rack for six mixed controllers (DualSense, Xbox, Switch Pro and 8BitDo Ultimate pads) with 34 mm wide arms, 50 mm deep and a 6 mm lip, that fit the gap between most grips. Two rows of three arms are 165 mm apart on a 520 × 200 × 5 mm plate with six 4 mm countersunk holes. Print the arms flat in PETG and the plate in two halves.
Small pads like an 8BitDo Micro need a clip, not an arm. Open the ready-made rack in SpeakCAD for free, change the rows in the viewer or the chat, then download the STL.
People also search
controller wall rack stlgame controller wall mount 3d printcontroller wall displayuniversal controller holder
Questions people ask about a universal controller wall rack for six pads
A wall rack for six mixed controllers (DualSense, Xbox, Switch Pro and 8BitDo Ultimate pads) with 34 mm wide arms, 50 mm deep and a 6 mm lip, that fit the gap between most grips. Two rows of three arms are 165 mm apart on a 520 × 200 × 5 mm plate with six 4 mm countersunk holes. Print the arms flat in PETG and the plate in two halves.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a wall rack for six controllers, 520×200×5 mm plate, two rows of three 34 mm arms 50 mm deep with 6 mm lips, 165 mm apart.
Small pads like an 8BitDo Micro need a clip, not an arm. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
Vallejo 17 ml dropper bottle tiered rackA tiered rack for Vallejo Model Color and Game Color 17 ml dropper bottles, which are 27 mm across and about 65 mm tall, and equally at home with Army Painte…Pokémon ETB deck-box insertAn insert that turns an Elite Trainer Box into two 80-card deck wells plus a 20 mm token tray.Logitech G Pro X 2 headset hookA hook that hangs a G Pro X 2 (about 190 mm across the cups) under a desk so the boom is not on the keyboard.Meta Quest Link cable head strap clipA clip that keeps a Quest Link or USB-C PCVR cable (4 to 6 mm thick) tight against the head strap so the plug is not pulled sideways out of the headset.Elektron Digitakt II angled standA pair of side stands that tilt an Elektron Digitakt II (215 × 176 × 63 mm) 15° towards you so the screen and trig keys are easier to read.RC car shock tower braceA shock tower brace spans the two upper shock mounts and stops the towers flexing or snapping during hard landings.