1
Hobby & gaming
Switch 2 Pro Controller wall hook
This is not a fixed STL. SpeakCAD generates the switch 2 pro controller wall hook to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Switch 2 Pro Controller wall hook, 55×75 mm plate, 36 mm tongue 48 mm deep, 5 mm lip, 10 mm cable slot, two 4 mm holes.
What a switch 2 pro controller wall hook is
A wall hook for the Nintendo Switch 2 Pro Controller (about 152 × 106 × 60 mm) that catches it between the grips with a 36 mm wide tongue, 48 mm deep, finished with a 5 mm lip. The 55 × 75 mm plate has two 4 mm countersunk holes and a 10 mm slot for a USB-C cable. Print on its side in PETG, 3 mm walls.
The first Switch Pro Controller is very close in size and also fits, but a DualSense has a wider grip gap. Open the hook in SpeakCAD for free, adjust any millimetre in the viewer or the chat, then download the STL.
People also search
switch 2 pro controller wall mountswitch pro controller hook stlswitch 2 pro controller holder 3d printpro controller wall hanger
Questions people ask about a switch 2 pro controller wall hook
A wall hook for the Nintendo Switch 2 Pro Controller (about 152 × 106 × 60 mm) that catches it between the grips with a 36 mm wide tongue, 48 mm deep, finished with a 5 mm lip. The 55 × 75 mm plate has two 4 mm countersunk holes and a 10 mm slot for a USB-C cable. Print on its side in PETG, 3 mm walls.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Switch 2 Pro Controller wall hook, 55×75 mm plate, 36 mm tongue 48 mm deep, 5 mm lip, 10 mm cable slot, two 4 mm holes.
The first Switch Pro Controller is very close in size and also fits, but a DualSense has a wider grip gap. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More hobby & gaming
GameSir G8 Galileo phone-stopA pair of stops that keep a 70–85 mm phone from sliding out of a G8 Galileo, 2 mm TPU lips.ROG Ally X desk standA desk stand for the ROG Ally X (280.6 × 111.3 × 24.7 to 36.9 mm) that holds it at 60 degrees with a 38 mm deep ledge sized for the thicker Ally X grips.MXR pedal riserA riser that lifts a standard MXR pedal (about 64 × 112 × 51 mm, like the Phase 90 or Dyna Comp) 20 mm above the back row so you can stomp it without hitting…Modular board game insert binsInsert bins fill a game box so components stay sorted and set-up drops from ten minutes to two.ASUS ROG Ally charging stand with angled cradleAn angled cradle for the ASUS ROG Ally and ROG Ally X (280 x 111 x 21 mm at the body, up to 32 mm at the grips) that keeps the handheld upright on a desk whi…Nintendo Switch 2 Joy-Con charging grip standA desk stand that holds a Switch 2 Joy-Con charging grip (about 155 × 110 × 45 mm) upright with the USB-C port at the bottom open.