1
Garden & outdoor
Starlink Mini pole mount adapter
This is not a fixed STL. SpeakCAD generates the starlink mini pole mount adapter to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Starlink Mini pole adapter, four corner hooks for a 298.5×259×38.5 mm dish, 200×60 mm backplate, U-clamp for 25–42 mm poles, M6 bolts, ASA.
What a starlink mini pole mount adapter is
A cradle that clamps a Starlink Mini (298.5 × 259 × 38.5 mm) to a 25–42 mm pole on a van, boat rail or balcony. Four corner hooks grip the dish edges with 0.5 mm clearance, the backplate is 200 × 60 mm, and a U-clamp takes two M6 bolts. Print in ASA with 4 mm walls, 40 % infill.
The standard Gen 3 dish is much larger and uses its own pipe adapter. Open the ready-made adapter in SpeakCAD for free, set the pole diameter in the chat or the viewer, then download the STL.
People also search
starlink mini pole mount stlstarlink mini mount 3d printstarlink mini pipe adapterstarlink mini bracket 3d model
Questions people ask about a starlink mini pole mount adapter
A cradle that clamps a Starlink Mini (298.5 × 259 × 38.5 mm) to a 25–42 mm pole on a van, boat rail or balcony. Four corner hooks grip the dish edges with 0.5 mm clearance, the backplate is 200 × 60 mm, and a U-clamp takes two M6 bolts. Print in ASA with 4 mm walls, 40 % infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Starlink Mini pole adapter, four corner hooks for a 298.5×259×38.5 mm dish, 200×60 mm backplate, U-clamp for 25–42 mm poles, M6 bolts, ASA.
The standard Gen 3 dish is much larger and uses its own pipe adapter. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More garden & outdoor
Bosch Kiox 300 display sun hoodA 40 mm hood that clips onto a Bosch Kiox 300 (about 60 × 45 mm) so the screen stays readable at noon.Tern GSD seatpost phone mountA mount that clamps a 30.9 mm GSD seatpost and holds a 70–85 mm phone for the rear-facing kid cam.Sea to Summit Spark footbox vent clipA clip that holds a Spark bag's footbox vent open on a humid night, 20 mm snap.Roborock Qrevo Master dock threshold rampA 22 mm ramp that lets a Qrevo Master climb a dock lip or room threshold the stock 20 mm Qrevo ramp does not clear.Self-watering pot insert with wickA self-watering insert sits inside a standard pot and lets a wick draw water up from a reservoir, so plants stay hydrated during a week away.Outdoor tap frost coverA frozen outside tap can split the pipe behind the wall, and a snug cover traps air around it through winter.