1
Organizers & storage
Spade bit wall holder, 6 to 38 mm
This is not a fixed STL. SpeakCAD generates the spade bit wall holder, 6 to 38 mm to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a spade bit holder, 330×30×30 mm block, 13 holes 6.8 mm by 22 mm deep spaced by bit width plus 5 mm, sizes 6 to 38 mm, two 4 mm screw holes.
What a spade bit wall holder, 6 to 38 mm is
A wall holder for 13 spade (paddle) bits from 6 to 38 mm on 1/4 inch hex shanks, about 150 mm long. Each bit stands blade-up in a 6.8 mm round hole 22 mm deep, spaced by the bit width plus 5 mm so the blades never touch, with sizes printed on the front. The block is 330 × 30 × 30 mm with two countersunk 4 mm holes. Print on its back in PETG.
Auger bits have round shanks up to 12 mm; they will not fit these holes. The ready-made holder opens free in SpeakCAD, and any millimetre changes in the viewer or the chat before the STL download.
People also search
spade bit holderpaddle bit organizer stlspade bit storage 3d printflat wood bit holder
Questions people ask about a spade bit wall holder, 6 to 38 mm
A wall holder for 13 spade (paddle) bits from 6 to 38 mm on 1/4 inch hex shanks, about 150 mm long. Each bit stands blade-up in a 6.8 mm round hole 22 mm deep, spaced by the bit width plus 5 mm so the blades never touch, with sizes printed on the front. The block is 330 × 30 × 30 mm with two countersunk 4 mm holes. Print on its back in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a spade bit holder, 330×30×30 mm block, 13 holes 6.8 mm by 22 mm deep spaced by bit width plus 5 mm, sizes 6 to 38 mm, two 4 mm screw holes.
Auger bits have round shanks up to 12 mm; they will not fit these holes. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More organizers & storage
Dyson Airwrap smoothing-brush caddyA caddy that holds the firm and soft Airwrap smoothing brushes plus the flyaway attachment in labelled wells so the magnets do not click together in a drawer.Framework 13 HDMI-module trayA tray that stores four Framework 13 expansion cards (HDMI, USB-C, USB-A, Ethernet) in 32 × 16 mm wells so they are not in a bag.Eurorack patch cable wall hangerA wall hanger for 3.5 mm Eurorack patch cables sorted by length or colour.Gridfinity 4 × 4 baseplate that fits the Bambu Lab A1 miniA 4 × 4 Gridfinity baseplate, 168 × 168 mm, that prints in one piece on the 180 × 180 mm bed of a Bambu Lab A1 mini.21700 battery storage tray for 8 cells with polarity marksA desktop tray that keeps eight 21700 lithium cells upright and separated, handy for vape, torch, power bank and e-bike battery projects.Canon LP-E6 battery holder with SD card slotsA camera-bag organizer that carries three Canon LP-E6, LP-E6N or LP-E6NH batteries, the 38.4 x 21 x 56.8 mm pack shared by the EOS R6, R6 Mark II, R5 and 5D…